Where to get custom Jazzmaster pickguards

[PetZounds]

So, I want to replace the pickguard on my Squier VM JM.
I want to get one that only has a rout for a rhythm circuit, neck pickup, and output jack.
Does anyone have experience with any custom pickguard places?
(If anyone has experience with getting one specifically for a VMJM, that would be even more helpful)

[antennafarm]

warmoth should be able to do that right up. i've never bought anything more complicated than a tele pickguard with a hb route, buuut uh, that went fine.

[PetZounds]

I think Warmoth warns that their pickguards are only made for their bodies and won't retrofit a guitar.
That might be just them covering their asses but you can never be too careful.

[foomanfat]

No, Warmoth's jazzmaster guards are shaped slightly differently. They stop in front of the bridge, instead of having the cut outs for the thimbles.

[UglyCasanova]

http://www.eyguitarmusic.com/Jazzmaster ... _c_79.html

and

http://www.wdmusic.com/pickguard_jz_1400.html

edit: nevermind. I didn't know you wanted a custom one. Maybe ask this dude to make you one? Just got a VI guard from him. Super nice! https://reverb.com/shop/neagle-luthier

[Hyphen Nation]

https://spitfiretortoiseshellpickguards.wordpress.com

[CyaNitrate]

Why not make one?

http://www.guitarfetish.com/Uncut-Pickg ... c_224.html

Material is cheap, trace the one you have, then modify it as you see fit. If you have a drill, a coping saw, and some patience, you can do it. Then it's really custom, and you can say you did it. They're one of my favorite creative mods.

[CyaNitrate]

Maybe ask this dude to make you one? Just got a VI guard from him. Super nice! https://reverb.com/shop/neagle-luthier

Those are nice, but expensive, another reason i vote for DIY.

[KNaB]

You can purchase a pickguard from http://www.wdmusic.com/pickguard_jz_1400.html and tell them what you do or don't want routed on it. I just went through them with a bass VI pickguard, but the pickups I installed were wider and shorter than the stock ones, so I ordered the pickguard and requested that they not do the routes for the pickups so I could do them myself. Worked great and they had great communication via email and answered any questions I had. good luck.

[Pentametre]

Yeah, I ordered a custom guard without a rhythm circuit for my CP Jazzy from WDmusic; had no troubles ordering and it fit fine. Don't recall offhand whether or not they have the option on the site for the VM Squier, though.

[lordgalvar]

I used a coping saw to cut a template out of thin, solid plywood for my old Yamaha Flying Samurai and then used random pickup templates I picked up at StewMac (and a few old pickgaurds). I used a dremel with one of those mini router bits. It gets too hot so you have to go slow and backtrack a bit while keeping it flush but a lamitate trimmer or real router table would be much better. I just cleaned up the pickgaurd with really really fine sand paper. It looked really good but it took a few hours. I made several prewired pickgaurds for that guitar before it got stolen. I don't know why I messed with it in the first place though. A really cheap project.

[ChetMagongalo]

I wanna make a pickguard out of a wood veneer or something.