ATTN DIYers want a deal on 1Kft rolls of 22awg strand wire?

onthetundra · Post by **onthetundra** » Fri Dec 16, 2011 8:55 pm

I have a huge supply of assorted colors of 22awg strand copper wire in 1000 foot rolls. I am looking to see how much interest there is and then do one mass shipment. The cost is $55 per roll and that is with shipping included (in the US). If you are outside the US it wont be much more. Email me if you want a roll or two or more. Thanks, Mark -- MAKESOUNDSLOUDLY@GMAIL.COM

John Lyons · Post by **John Lyons** » Fri Dec 16, 2011 9:44 pm

Couple questions.
How many strands in the wire?
PVC or Teflon (or?)
Thanks

John

culturejam · Post by **culturejam** » Fri Dec 16, 2011 11:10 pm

Other questions:

Is it pre-tinned? How about bonded?

onthetundra · Post by **onthetundra** » Fri Dec 16, 2011 11:52 pm

7 strands, pvc, I believe its tinned. The strands look tinned to me anyway.

eatyourguitar · Post by **eatyourguitar** » Sat Dec 17, 2011 1:37 am

24awg is my weapon of choice

John Lyons · Post by **John Lyons** » Sat Dec 17, 2011 1:58 am

eatyourguitar wrote:24awg is my weapon of choice

#22 is two better (smaller number/more wiriz) :poke:

McSpunckle · Post by **McSpunckle** » Sat Dec 17, 2011 3:37 am

I use #26. SUCK IT.

Good deal here as long as the wire is half decent!

onthetundra · Post by **onthetundra** » Sat Dec 17, 2011 4:33 am

I prefer 24 but this supply is crazy cheap so Im switching to 22. Let me know if you guys want any. Its great wire. I was paying 7 dollars per roll of 100ft 24awg but this supply of 22 is a far better deal.

McSpunckle · Post by **McSpunckle** » Sun Dec 18, 2011 1:07 am

I got my 24 gauge pre-tinned millitary spec wire for like $45 for 1000 feet.

http://www.weicowire.com//cartadd.asp?s ... ok-Up+Wire

... looks like the price has gone up. But it's still pretty cheap. They also have the same wire in a non-tinned (about the same price), and 19 strand ($70 a roll)

John Lyons · Post by **John Lyons** » Sun Dec 18, 2011 2:38 am

I've been getting 2500 foot reels of #22 7 strand silver plated teflon insulated wire for $60
I bought 4 Reels. :animal:

greeny23 · Post by **greeny23** » Sun Dec 18, 2011 5:59 am

i use cloth wire so i don't have to strip it back

eatyourguitar · Post by **eatyourguitar** » Sun Dec 18, 2011 1:46 pm

read this

the jacket is thinner while having a higher melting point than PVC. and it is also very eco friendly. $225 per 1000ft :no:

its a dream

ARC Effects · Post by **ARC Effects** » Mon Dec 19, 2011 1:25 am

John Lyons wrote:I've been getting 2500 foot reels of #22 7 strand silver plated teflon insulated wire for $60
I bought 4 Reels.

Any chance you'd share the source?

John Lyons · Post by **John Lyons** » Mon Dec 19, 2011 1:34 am

Ebay

McSpunckle · Post by **McSpunckle** » Wed Dec 21, 2011 6:01 pm

eatyourguitar wrote:read this

the jacket is thinner while having a higher melting point than PVC. and it is also very eco friendly. $225 per 1000ft

its a dream

I've been using Alpha Ecowire lately. Stuff is ace. They describe it similar to the Beldin, but the datasheets show that it's even thinner. It's cheaper, too, but still really expensive compared to standard PVC wire. It really does handle soldering way better than PVC. It's super flexible, too... almost to a fault. It will not stay put without some help.

http://www.mouser.com/AlphaWireEcoWire/

I don't know how environmentally friendly it really can be, honestly... it's still plastic. But PVC is pretty toxic stuff to produce-- one of (if not the) worst plastics.

ilovefuzz.com

ATTN DIYers want a deal on 1Kft rolls of 22awg strand wire?

ATTN DIYers want a deal on 1Kft rolls of 22awg strand wire?

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi

Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi