1 Spot problem
Moderator: Ghost Hip
- Blurillaz
- IAMILFFAMOUS
- Posts: 4592
- Joined: Sun Feb 22, 2009 6:31 pm
- Location: A level you spend too long in
1 Spot problem
So I'm playing my guitar, and randomly, the sound will drop out and you'll hear- click......click.....click....click..... which goes on for a while, then it will come back in. At first, I thought it was a bad cable, but it turns out this only happens when I power stuff with my 1 spot, specifically, dirt pedals. What's up with that?
we
- aen
- IAMILFFAMOUS
- Posts: 4363
- Joined: Sat May 19, 2007 10:34 pm
- Contact:
Re: 1 Spot problem
You're probably grounding out the unused pluggers. sometimes i go so far as to put tape over mine.
Chankgeez wrote:
DWARFCRAFT: We are not fucking around this year.
- Caesar
- Supporter
- Posts: 2360
- Joined: Fri Jul 11, 2008 10:15 pm
- Location: Maryland
Re: 1 Spot problem
They now come with little plastic caps to put over the unused plugs.
A long time ago, in a galaxy far far away, God said, "Let there be Lips!" And there were, and they were good, and the lips said...
http://soundcloud.com/gaiusrex
http://soundcloud.com/gaiusrex
- royaltrux
- committed
- Posts: 159
- Joined: Tue May 12, 2009 7:52 pm
Re: 1 Spot problem
I am getting a similar hum from the 1spot.
I think it is due to 4 caps not being used.
I can't really use another power supply, because my older pedals need a male adapter (which I can the converter for), and my Clean/Dirty Chan needs a 9V adapter converter.
What kind of tape are you guys using on that? I'm going to try that first and if it doesn't work, I'll just get 2 "5" adapters instead of currently used an "8" and a "5" which leaves 3-4 caps unused.
I think it is due to 4 caps not being used.
I can't really use another power supply, because my older pedals need a male adapter (which I can the converter for), and my Clean/Dirty Chan needs a 9V adapter converter.
What kind of tape are you guys using on that? I'm going to try that first and if it doesn't work, I'll just get 2 "5" adapters instead of currently used an "8" and a "5" which leaves 3-4 caps unused.

- Blurillaz
- IAMILFFAMOUS
- Posts: 4592
- Joined: Sun Feb 22, 2009 6:31 pm
- Location: A level you spend too long in
Re: 1 Spot problem
Well, the biggest problem isn't the hum, all pedals powered by the one spot won't work and the signal doesn't go through and all you hear is a weird clicking noise until it starts back up
we
- Ironbird13
- committed
- Posts: 324
- Joined: Thu Aug 27, 2009 6:31 am
- Location: at the start of time....
Re: 1 Spot problem
Blurillaz wrote:Well, the biggest problem isn't the hum, all pedals powered by the one spot won't work and the signal doesn't go through and all you hear is a weird clicking noise until it starts back up
yeah that sounds like an unused plug shorting out on the chassis of a pedal or something