Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!
So I got a soldering iron the other day and I was able to successfully swap out an old pickup in my strat. It was a lot of fun and has me itching to solder more shit and make some pedals.
So where do I start? Any kits I should look at, youtube videos, ect. School ya boi pls.
ummohyeah wrote:Godspeed rule and no amount of tape would make their pedalboards safe from my cum.
BitchPudding wrote:
No, I'm THE bitch. The only one allowed here.
If I were to do it over again I'd drop like $100 on stuff from Tayda and get some solder off eBay (60/40 rosin core 0.8mm) and start building some basic 2 pot shit. PCB's are easy though I would suggest making stripboard stuff for easier projects.
You kind of have to jump in and get a shit ton of parts but the good news is they are all cheap. I have like 20 tackle boxes with roughly 1x1 inch slots, 4 for resistors 3 for caps. 1 for electro caps 2 for transistors, one for diodes, 1 for sockets, 2 for LEDs and bezels from 3mm to 10mm in about 8 colors each, 2 for switches and pots, a 3x2' toolbox full of jacks and rotary switches. A briefcase full of knobs, cardboard boxes full of enclosures from 1590B to J and G and DD etc.. ..
It's a consuming hobby, I love making stuff and then playing it. Some stuff works out great some stuff takes a while. I've never abandoned a project yet though. I would be happy to make you a beginning parts list and email it to you rather than try to type it up on my phone.
Thanks for the answers dudes. I'm gonna buy a kit to start and look into getting parts just to make whatever. Gonna hit up dwarfcraft about those Devi kits too. I'll let you know how it goes.
ummohyeah wrote:Godspeed rule and no amount of tape would make their pedalboards safe from my cum.
BitchPudding wrote:
No, I'm THE bitch. The only one allowed here.
Everyone asks the same question but no one reads the answers. I don't even waste my time spoon feeding people anymore. Look at my post count and guess how many times myself and others here have had to type pretty much the same answer to someone who doesn't even provide background information about your personal budget for time and money not to mention your logic as to why you would even want to do this in the first place and what you expect to get from it as far as experience, status, money, gear or pussy.
I would just add that you get some nice job lots on ebay sometimes.
About 7 years ago when I was just getting interested I spent 12 quid on some guy's kit and got an iron, a sucker, loads of caps, resistors etc. I'm still using some of it today.
I generally prefer to see what secondhand/old stock stuff I can get cheap and then what I can do with it rather than order components for a particular circuit, but I have been spending years doing this now so I have a lot - I'm not suggesting you start out this way. It gives me a kick to be soaking up some of the surplus and salvageable stuff out there and put it to some creative use. There's so much of it.
Also, learn how to be safe handling and using leaded solder.
eatyourguitar wrote:Everyone asks the same question but no one reads the answers. I don't even waste my time spoon feeding people anymore. Look at my post count and guess how many times myself and others here have had to type pretty much the same answer to someone who doesn't even provide background information about your personal budget for time and money not to mention your logic as to why you would even want to do this in the first place and what you expect to get from it as far as experience, status, money, gear or pussy.
This...seems aggressive.
Im just doing it cause I want to. Im a bored motherfucker who likes pedals and has nothing but time on their hands.
That good enough for you?
Invisible Man wrote:It’s pretty obvious that I’m building voltage-starved fuzz pedals to get pussy.
I didn’t think I needed to say it.
Its ok bby, we know.
AZX309 wrote:Do a small BYOC kit and then give your hand at Vero layouts.
Actually ended up doing that. Ordered an op amp lil beaver kit. Should be here within the week.
ummohyeah wrote:Godspeed rule and no amount of tape would make their pedalboards safe from my cum.
BitchPudding wrote:
No, I'm THE bitch. The only one allowed here.
If you want to fuck around with different circuits I would recommend getting a breadboard setup with a box that has in and out jacks, power connection, and a switch. This was the first thing I made and had a blast building circuits and swapping components out to see how the sound was effected. Learned a lot this way and then could decide which ones I wanted to make into pedals. You may want to just build some pedals first, though, but definitely worth getting a breadboard down the road if you become addicted to DIY. If you have time on your hands you will likely get addicted as it's super great fun....
LaoWiz wrote:If you want to fuck around with different circuits I would recommend getting a breadboard setup with a box that has in and out jacks, power connection, and a switch. This was the first thing I made and had a blast building circuits and swapping components out to see how the sound was effected. Learned a lot this way and then could decide which ones I wanted to make into pedals. You may want to just build some pedals first, though, but definitely worth getting a breadboard down the road if you become addicted to DIY. If you have time on your hands you will likely get addicted as it's super great fun....
hell yea, definitely something I wanna do at some point down the road. I have a lot of ideas. Stupid ones. Loud ones. But ones I wanna try one day just cause.
ummohyeah wrote:Godspeed rule and no amount of tape would make their pedalboards safe from my cum.
BitchPudding wrote:
No, I'm THE bitch. The only one allowed here.
