ilovefuzz.com

just got a whammy xp100 WHAMMY WAH !!!!! YEAH

works and sounds great
when you put in bypass no sound comes through (when you hold for tuner you get sound again) I think this is the opposite of how it should work


Can't find anything online


is this a settings thing????

Switches can be finicky on those, but there is also a button on the back I have accidentally pressed that seemed to mess something up, try pressing that. If not, switches are cheap on eBay.

That's very weird. Mine never did that. Probably a dodgy switch.

yeah I figured, since the switch will put it into tuner mode if you hold it not sure who or how to fix.
may just get a single tb loop for it

hbombgraphics wrote:yeah I figured, since the switch will put it into tuner mode if you hold it not sure who or how to fix.
may just get a single tb loop for it

I always did that anyways because I didn't trust the switch.

As a precaution, I would recommend a factory reset.

Factory Reset/Pedal Calibrate - To reset the User programs to their factory settings and calibrate the
expression pedal, press and hold the <BYPASS/(Hold)TUNER> foot switch and apply power to the unit.
Wait until the letters rS appear in the display and release the foot switch. The display will now show: Pd
and CA , indicating that you are in pedal calibrate mode Once Pb appears, rock the pedal back and
press the <BYPASS> foot switch. When PF appears, rock the pedal forward and press the <BYPASS> foot
switch. SA will next appear in the display to confirm the pedal is now calibrated.

If the switch is indeed flaking out, you can get a complete rebuild kit here;

http://www.ebay.ca/itm/Digitech-Push-Bu ... Sw~OdVWFVN

This thread is a good reminder for socking away some $ in preparation for getting an XP-All mod done to my Reverberator

I will try a reset, and I ordered a TB Loop kit to slam together
My 10yo wants to learn to solder so I think this is a good starter project


thanks for all the input