Want to build preamp-eq pedal for rack reverb
Moderator: Ghost Hip
Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!
-
D Rock
- committed
- Posts: 209
- Joined: Wed Sep 02, 2015 12:25 am
Want to build preamp-eq pedal for rack reverb
Okay so I am in desperate need of a spring reverb for my studio. I have a perfect working tank in my Laney VC-30 but something is wrong with the reverb circuit and it never works. So ideally I would like to take the tank out and have it mounted in my rack. But now I need a preamp/eq/return preamp pedal with RCA outs to power this thing. Can anyone point me in the right direction on this. I've seen the video where the guy builds one with phono preamps and alittle power supply, but an all in one contained pedal besides the actual tank would be ideal. Any leads?
-
crochambeau
- IAMILF
- Posts: 2204
- Joined: Mon Jul 20, 2015 12:49 pm
- Location: Cascadia
- Contact:
Re: Want to build preamp-eq pedal for rack reverb
What's the input impedance of the tank? They vary from 8 ohms to ~ 2K, and that will play a role in getting something that drives it well.
In terms of an off the shelf solution I have no idea, but the individual pieces are quite simple. A headphone amplifier will usually get you the drive (or a small amp, I'm fond of single ended tubes pushing springs), recovery is usually close to a typical guitar level signal, so loads of stuff can be used there..
In terms of an off the shelf solution I have no idea, but the individual pieces are quite simple. A headphone amplifier will usually get you the drive (or a small amp, I'm fond of single ended tubes pushing springs), recovery is usually close to a typical guitar level signal, so loads of stuff can be used there..