Page 1 of 2

AMPEG V2 FUCK YEAH

Posted: Wed Apr 15, 2015 10:35 am
by weed_killer
So yesterday I scored a non-master volume Ampeg V2 for $600. First experience with a good tube amp - I've had a few little 5 watt department store amps before. Right now I don't have a cab for it. My amp right now is an early jc120. Would I be able to plug the ampeg into the speakers, and use it as a 2x12 for a time until I pick up a dedicated cab? It's not the kind of thing I'd want to try without asking one of you first, haha.

----------------------------------------------

Scored a 1969 traynor 1x15 cab. It sounds fantastic:

Image

Re: is it possible? (ampeg/jc120 help)

Posted: Wed Apr 15, 2015 11:03 am
by BoatRich
As long as the speakers on the JC120 are the right ohmage (idk about V2's but my V4 does 8 all the way down to 2 so you're probably fine) it should be okay? Does it have a dedicated cable to the speakers or is it just speaker wire?

Re: is it possible? (ampeg/jc120 help)

Posted: Wed Apr 15, 2015 2:36 pm
by weed_killer
8 ohm, so no problem there (V4 is identical besides two extra tubes/more power, so I have the same switch), but after I checked the back I remembered that a) it's just speaker wire and b) it's an early one, so there's only six jacks on the back instead of eight and none of them are labelled. Guess I'll have to get a cab after all.

Re: is it possible? (ampeg/jc120 help)

Posted: Wed Apr 15, 2015 7:57 pm
by benjuro
It'd be pretty easy to butcher one end of a speaker cable and crimp tab connectors onto the lead and ground wires...but I feel compelled to say CONGRATS, NMV V2 is the best ever :rock: and so you should ABSOLUTELY find an excellent cab to go with it.

...but we can help you disconnect and rig the jc120 speakers up pretty easily in the meantime if you want.

Re: is it possible? (ampeg/jc120 help)

Posted: Wed Apr 15, 2015 8:04 pm
by tremolo3
benjuro wrote:NMV V2 is the best
[citation needed] :excellent:

How does it "sound" compared to the V4?

Re: is it possible? (ampeg/jc120 help)

Posted: Wed Apr 15, 2015 11:35 pm
by rfurtkamp
Not an Ampeg guy, but word of caution in running the speakers.

DO NOT DO NOT DO NOT have them in ANY WAY connected to the JC-120's electronics.

Also, they're probably going to be a lot more hi-fi than the junkers Ampeg of the time used.

That may be good for you, it may not.

Re: is it possible? (ampeg/jc120 help)

Posted: Thu Apr 16, 2015 7:33 am
by weed_killer
unfortunately some asshat swapped the original roland speakers for some low-end 'legend' brand, so it isn't quite as 'hi-fi' as stock. I'm not gonna bother swapping any cables though, but I appreciate the help. I found an old traynor 1x15 that I should be picking up today - 8 ohm. Right now this is my bedroom amp, cause I'm crazy, so the 1x15 seems like an ideal compared to something like a 4x12.

Re: is it possible? (ampeg/jc120 help)

Posted: Thu Apr 16, 2015 7:38 am
by Iommic Pope
weed_killer wrote:unfortunately some asshat swapped the original roland speakers for some low-end 'legend' brand, so it isn't quite as 'hi-fi' as stock. I'm not gonna bother swapping any cables though, but I appreciate the help. I found an old traynor 1x15 that I should be picking up today - 8 ohm. Right now this is my bedroom amp, cause I'm crazy, so the 1x15 seems like an ideal compared to something like a 4x12.
Dude, they aren't Eminence Legends are they?

Re: is it possible? (ampeg/jc120 help)

Posted: Thu Apr 16, 2015 8:20 am
by benjuro
ramonovski wrote:
How does it "sound" compared to the V4?
Very similar if you're comparing same-era models, the V2 just reaches that brilliant power tube breakup at a much more reasonable volume.

Re: is it possible? (ampeg/jc120 help)

Posted: Thu Apr 16, 2015 8:52 am
by weed_killer
Iommic Pope wrote:
weed_killer wrote:unfortunately some asshat swapped the original roland speakers for some low-end 'legend' brand, so it isn't quite as 'hi-fi' as stock. I'm not gonna bother swapping any cables though, but I appreciate the help. I found an old traynor 1x15 that I should be picking up today - 8 ohm. Right now this is my bedroom amp, cause I'm crazy, so the 1x15 seems like an ideal compared to something like a 4x12.
Dude, they aren't Eminence Legends are they?
god no -the brand name is Legends. 'Made in Philippines' is the only info on 'em. If they were Eminence Legends I wouldn't complain. :lol:

Re: AMPEG V2 FUCK YEAH

Posted: Thu Apr 16, 2015 8:17 pm
by weed_killer
got it sorted out, see revised post. Thanks for the help!

Re: AMPEG V2 FUCK YEAH

Posted: Thu Apr 16, 2015 10:29 pm
by smallsnd/bigsnd
V2/1x15 cab? excellent combo. one of my favorites.

Re: AMPEG V2 FUCK YEAH

Posted: Thu Apr 16, 2015 11:18 pm
by kbit
Man, even the grill cloth matches. Sexy lookin' set up :thumb:

Re: AMPEG V2 FUCK YEAH

Posted: Thu Apr 16, 2015 11:20 pm
by weed_killer
smallsnd/bigsnd wrote:V2/1x15 cab? excellent combo. one of my favorites.
Thanks! I just picked up skully's old orange fuck, and it sounds so, so good through this. Second honeymoon level. :love:
kbithecrowing wrote:Man, even the grill cloth matches. Sexy lookin' set up :thumb:
:omg:

Re: AMPEG V2 FUCK YEAH

Posted: Fri Apr 17, 2015 12:35 am
by BoatRich
weed_killer wrote:
smallsnd/bigsnd wrote:V2/1x15 cab? excellent combo. one of my favorites.
Thanks! I just picked up skully's old orange fuck, and it sounds so, so good through this. Second honeymoon level. :love:
kbithecrowing wrote:Man, even the grill cloth matches. Sexy lookin' set up :thumb:
:omg:
Dude fuck into the V series amps is glorious. I haven't turned mine off on my bass vi board since I bought it