tiny expression pedal to use with elements.

allicio · Post by **allicio** » Thu Sep 13, 2012 4:40 am

Morning chaps
Wondering if anybody can help,
I'm after a tiny expression pedal to work with the elements. Basically I've got knack all space left on my board so have been looking at small box versions.
I've seen the t1m version but have heard bad customer service reports so I'm looking for alternatives
I've seen this one from mission engineering:
http://missionengineering.com/shop/mission-xpb-series/
But I don't know if it has the required 50k resistor.
Does anybody have any other suggestions/recommendations?
Andy

Scruffie · Post by **Scruffie** » Thu Sep 13, 2012 5:57 am

If it's just a pot in a box, take the pot out and replace it with a 50k if it's the wrong value.

You could build one of those yourselve in to an ABS plastic box (or a different sized hammond enclosure, 1590A?) for $10.

goroth · Post by **goroth** » Thu Sep 13, 2012 6:06 am

I wouldn't buy from t1m. If you don't have a soldering iron anyone on the DIY forum could whip something like that up for you in a heartbeat. If you're in EU I'll do it for ya.

allicio · Post by **allicio** » Thu Sep 13, 2012 11:05 am

Cheers for the input chaps and gregorroth thanks so much for the kind offer.
After researching All afternoon I came to the conclusion it's probably better to go with a full size pedal off my board so I've ordered a moog ep2. As Ryan says there built solid and they definitely work with the elements.
Thanks again for your input chaps it's much appreciated

Andy

goroth · Post by **goroth** » Thu Sep 13, 2012 5:02 pm

I've got an EP-2 and they're pretty nice, so good choice man!

sylnau · Post by **sylnau** » Thu Sep 13, 2012 7:16 pm

I heard good thing about the Nose:

Ryan · Post by **Ryan** » Thu Sep 13, 2012 7:16 pm

If you guys need a pot in a box you can come to me for one too, I'll start making them available... just need to order some cool coloured little boxes. 2 pots in a box? No problem!

All with reliable and consistent communication and no religious affiliation. :p :cool:

jmoote · Post by **jmoote** » Thu Sep 13, 2012 11:08 pm

Something tells me if you try to ship boxes of pot to customers outside Canada, it may not go so well :lol:

Helter · Post by **Helter** » Fri Sep 14, 2012 12:41 am

I can't tell if you're being serious Ryan, but if you are I might be interested in that too because the only pedal that has me interested in using an expression pedal is the elements.

goroth · Post by **goroth** » Fri Sep 14, 2012 3:08 am

Ryan wrote: no religious affiliation.

WTF? I thought The Elements was like the fourth book of the Bible? And you said it contains "The Cleanness", which is exactly what I strive after in this life. Gosh darn it, I thought Dr Sci was my free ticket to the afterlife. :cry:

allicio · Post by **allicio** » Fri Sep 14, 2012 7:48 am

greigoroth wrote:I've got an EP-2 and they're pretty nice, so good choice man!

Cheers mate. I couldn't believe the price of it! Only 40 quid delivered! I didn't know they were that cheap! Would have cost me that to get a t1m mini box one, so jobs a good un!

Ryan · Post by **Ryan** » Fri Sep 14, 2012 5:51 pm

jmoote wrote:Something tells me if you try to ship boxes of pot to customers outside Canada, it may not go so well :lol:

Haha good point! I'll have to keep it in Canada... *looks up Jeff's address*

Helter wrote:I can't tell if you're being serious Ryan, but if you are I might be interested in that too because the only pedal that has me interested in using an expression pedal is the elements.

No joke, Brad, I'm gonna order the stuff to make these right away. Just gotta order some small powder coated boxes from Pedals Parts Plus, should be able to make some in a couple/few weeks.

So with these little pot-in-a-box expression boxes, the intention is that you'll use them with your foot, right? So it would be best if they came with the MXR rubber knob donut? Or just the biggest knob possible? Something you can get your foot onto the side of and adjust it?

I'll do the 1590LB (small square) box with one knob and one jack and I'll do the 1590BB (mini-Reverberator box) with 2 pots and 2 jacks or 3 and 3 would probably fit too.

greigoroth wrote:WTF? I thought The Elements was like the fourth book of the Bible? And you said it contains "The Cleanness", which is exactly what I strive after in this life. Gosh darn it, I thought Dr Sci was my free ticket to the afterlife. :cry:

Don't worry, Matt, this is still the case! When you buy, and more importantly, enjoy, a Dr. Scientist pedal, you've entered your soul into a perpetually-binding, non-cancellable, non-transferable, eternal agreement that I get your soul. To put on my pizza. I talk a lot about pepperoni and mushrooms but that's just BS, it's souls, man, souls that go on a pizza!

Helter · Post by **Helter** » Fri Sep 14, 2012 9:17 pm

Yeah I think the MXR style knobs would be best since they have those little spike-y things on them making them easier to turn. I think that would be better than just like the biggest knob possible. Put me down for one, dawg!

oldangelmidnight · Post by **oldangelmidnight** » Fri Sep 14, 2012 9:46 pm

If possible, it would be cool to design them so the pot could be either on top or on the side.

wsas3 · Post by **wsas3** » Fri Sep 14, 2012 10:38 pm

oldangelmidnight wrote:If possible, it would be cool to design them so the pot could be either on top or on the side.

Bruh where ya been?

ilovefuzz.com

tiny expression pedal to use with elements.

tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.

Re: tiny expression pedal to use with elements.