Page 1 of 2
ATTN DIYers want a deal on 1Kft rolls of 22awg strand wire?
Posted: Fri Dec 16, 2011 8:55 pm
by onthetundra
I have a huge supply of assorted colors of 22awg strand copper wire in 1000 foot rolls. I am looking to see how much interest there is and then do one mass shipment. The cost is $55 per roll and that is with shipping included (in the US). If you are outside the US it wont be much more. Email me if you want a roll or two or more. Thanks, Mark --
MAKESOUNDSLOUDLY@GMAIL.COM
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Fri Dec 16, 2011 9:44 pm
by John Lyons
Couple questions.
How many strands in the wire?
PVC or Teflon (or?)
Thanks
John
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Fri Dec 16, 2011 11:10 pm
by culturejam
Other questions:
Is it pre-tinned? How about bonded?
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Fri Dec 16, 2011 11:52 pm
by onthetundra
7 strands, pvc, I believe its tinned. The strands look tinned to me anyway.
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Sat Dec 17, 2011 1:37 am
by eatyourguitar
24awg is my weapon of choice
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Sat Dec 17, 2011 1:58 am
by John Lyons
eatyourguitar wrote:24awg is my weapon of choice
#22 is two better (smaller number/more wiriz)
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Sat Dec 17, 2011 3:37 am
by McSpunckle
I use #26. SUCK IT.
Good deal here as long as the wire is half decent!
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Sat Dec 17, 2011 4:33 am
by onthetundra
I prefer 24 but this supply is crazy cheap so Im switching to 22. Let me know if you guys want any. Its great wire. I was paying 7 dollars per roll of 100ft 24awg but this supply of 22 is a far better deal.
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Sun Dec 18, 2011 1:07 am
by McSpunckle
I got my 24 gauge pre-tinned millitary spec wire for like $45 for 1000 feet.
http://www.weicowire.com//cartadd.asp?s ... ok-Up+Wire... looks like the price has gone up. But it's still pretty cheap. They also have the same wire in a non-tinned (about the same price), and 19 strand ($70 a roll)
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Sun Dec 18, 2011 2:38 am
by John Lyons
I've been getting 2500 foot reels of #22 7 strand silver plated teflon insulated wire for $60
I bought 4 Reels.
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Sun Dec 18, 2011 5:59 am
by greeny23
i use cloth wire so i don't have to strip it back
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Sun Dec 18, 2011 1:46 pm
by eatyourguitar
read
thisthe jacket is thinner while having a higher melting point than PVC. and it is also very eco friendly. $225 per 1000ft
its a dream
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Mon Dec 19, 2011 1:25 am
by ARC Effects
John Lyons wrote:I've been getting 2500 foot reels of #22 7 strand silver plated teflon insulated wire for $60
I bought 4 Reels.
Any chance you'd share the source?
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Mon Dec 19, 2011 1:34 am
by John Lyons
Ebay
Re: ATTN DIYers want a deal on 1Kft rolls of 22awg strand wi
Posted: Wed Dec 21, 2011 6:01 pm
by McSpunckle
eatyourguitar wrote:read
thisthe jacket is thinner while having a higher melting point than PVC. and it is also very eco friendly. $225 per 1000ft
its a dream
I've been using Alpha Ecowire lately. Stuff is ace. They describe it similar to the Beldin, but the datasheets show that it's even thinner. It's cheaper, too, but still really expensive compared to standard PVC wire. It really does handle soldering way better than PVC. It's super flexible, too... almost to a fault. It will not stay put without some help.
http://www.mouser.com/AlphaWireEcoWire/I don't know how environmentally friendly it really can be, honestly... it's still plastic. But PVC is pretty toxic stuff to produce-- one of (if not the) worst plastics.