Perf substitutes?

Here Lies The Fire · Post by **Here Lies The Fire** » Sun Feb 20, 2011 10:33 pm

Hey, I live out in the middle of nowhere and I don't have anything to build my circuit on at all.

Sooooo what kinds of things would do good as make shift boards? :idk:

Scruffie · Post by **Scruffie** » Sun Feb 20, 2011 10:58 pm

The very first Mosrite Fuzzrites were built on a Tough Paper phenolic type material, just punch holes in something simmilar (aslong as it's something that wont set fire)

Or... a Bit of wood with Nails in it to immitate Tag Board.

Or you could wire it point to point, just soldering each lead to its counterpart... but that can get messy.

Those would be my sugestions untill you can come up with something better.

Here Lies The Fire · Post by **Here Lies The Fire** » Sun Feb 20, 2011 11:05 pm

What about an old gift card?!

or will that melt? I mean how hot do these things get usually?

Edit: oh yeah, soldering... how the hell would I do that? D:'

futuresailors · Post by **futuresailors** » Sun Feb 20, 2011 11:14 pm

cardboard.

Here Lies The Fire · Post by **Here Lies The Fire** » Sun Feb 20, 2011 11:32 pm

futuresailors wrote:cardboard.

but....fire?

Scruffie wrote: (aslong as it's something that wont set fire)

okay can you tell me how I would go about doing this then?
Seems like some risky business.

Scruffie · Post by **Scruffie** » Sun Feb 20, 2011 11:42 pm

Here Lies The Fire wrote:
futuresailors wrote:cardboard.

but....fire?

okay can you tell me how I would go about doing this then?
Seems like some risky business.

Plasticy Cardboard (Like Thick Photo Paper* Sets fire a bit less easy... more... melts.

It'll probably just scorch rather than set fire but I don't fancy getting sued :lol:

Do it point to point if you have nothing else to do it on, although surely you can muster some wood and nails? Or A bit of Tree Branch and Some Bits of Metal?

Edit: oh yeah, soldering... how the hell would I do that? D:'

I hope you're not asking for soldering substitues :lol:

if you are... before solder I think i'm right in saying they used Epoxy to hold the components together.

Twist and tie with a pair of plyers would do as a very temporary substitute though.

All this seems to be skipping around the end product though, is this just to test something or do you intend to box it up... you should really consider long term if so.

tuffteef · Post by **tuffteef** » Sun Feb 20, 2011 11:54 pm

known subs
buckets for capacitors
a hose then clamp the middle with your fingers for resistors

Here Lies The Fire · Post by **Here Lies The Fire** » Mon Feb 21, 2011 12:04 am

Teej212 · Post by **Teej212** » Mon Feb 21, 2011 12:10 am

use the internet? and you dont have a radioshack near you?

Here Lies The Fire · Post by **Here Lies The Fire** » Mon Feb 21, 2011 1:01 am

Teej212 wrote:use the internet? and you dont have a radioshack near you?

Actually yes...but seriously 2,000 people live here.
Our Radioshack only sells remote control cars from the 1990's and cell phones. (it's more of a US Cellular dealership)
UNLESS they have some secret back room of wonder and amazement...
If they ordered that kind of stuff it would be because they have to.

McSpunckle · Post by **McSpunckle** » Mon Feb 21, 2011 2:48 am

Here Lies The Fire wrote:
Teej212 wrote:use the internet? and you dont have a radioshack near you?

UNLESS they have some secret back room of wonder and amazement...

It's more of a wall of drawers and overpriced disappointment.

How big of a perf do you need? Layout? I can cut some of mine up and mail it to you.

Here Lies The Fire · Post by **Here Lies The Fire** » Mon Feb 21, 2011 2:52 am

What?! awesome I am doing the Silver Crank: viewtopic.php?f=151&t=14892
and I can PM you my address...I'll somehow pay you back though

(because I want to)

futuresailors · Post by **futuresailors** » Tue Feb 22, 2011 8:07 pm

Here Lies The Fire wrote:
futuresailors wrote:cardboard.

but....fire?

That's part of the charm. Throw one of those it in a plexiglass enclosure with some extra leds to make the smoke all pretty.

D3rP · Post by **D3rP** » Tue Feb 22, 2011 11:04 pm

I don't see why you couldn't get some from smallbear. :idk:

Rygot · Post by **Rygot** » Wed Feb 23, 2011 1:39 pm

McSpunckle wrote:
Here Lies The Fire wrote:
Teej212 wrote:use the internet? and you dont have a radioshack near you?

UNLESS they have some secret back room of wonder and amazement...

It's more of a wall of drawers and overpriced disappointment.

How big of a perf do you need? Layout? I can cut some of mine up and mail it to you.

my god that is the most accurate description of a radio shack ever.

ilovefuzz.com

Perf substitutes?

Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?

Re: Perf substitutes?