ilovefuzz.com

first step- get the parts

Potentiometers
100K x2

resistors
1K
10K
2.2M

Capacitors
.1uF x2

Transistors
1 NPN transistor- 2n3904, MPSA18, 2N2222- Most NPN transistors will work
1 PNP transistor-i will be using a 2N3906

i will be using sockets for the transistors, and it is very highly recommended for a beginning builder

also note- i am using a lot of salvaged parts, i havent been able to order new components for a while

Next, here is the perf layout i will be using.

done with the board

a or b pots?

Great work! It should be noted that if you replace Q2 with another .1uF Cap you get yourself a Dark Boost. The 2 legs of the cap go to the outer 2 holes where Q2 would be.

I know the Karaoke Party's similar too but having troube working it out properly.

devi has said she has used both types of pots.

also, remove the 2.2m resistor and put in a diode in its place and you have a bazz fuss

jfrey wrote::yay:

I think you owe tuffteef $20.

im not sure why but ill take that 20 dollars RIGHT NAO!
paypal FTW