Detailed How to Build a Silvercrank

[Teej212]

first step- get the parts

Potentiometers
100K x2

resistors
1K
10K
2.2M

Capacitors
.1uF x2

Transistors
1 NPN transistor- 2n3904, MPSA18, 2N2222- Most NPN transistors will work
1 PNP transistor-i will be using a 2N3906

i will be using sockets for the transistors, and it is very highly recommended for a beginning builder

also note- i am using a lot of salvaged parts, i havent been able to order new components for a while

[Teej212]

Next, here is the perf layout i will be using.

[Teej212]

[Teej212]

[Teej212]

[Teej212]

[Teej212]

[Teej212]

done with the board

[Teej212]

[tuffteef]

a or b pots?

[chutneyfarmer]

Great work! It should be noted that if you replace Q2 with another .1uF Cap you get yourself a Dark Boost. The 2 legs of the cap go to the outer 2 holes where Q2 would be.

I know the Karaoke Party's similar too but having troube working it out properly.

[Teej212]

devi has said she has used both types of pots.

also, remove the 2.2m resistor and put in a diode in its place and you have a bazz fuss

[jfrey]

[culturejam]

:yay:

I think you owe tuffteef $20.

[tuffteef]

im not sure why but ill take that 20 dollars RIGHT NAO!
paypal FTW