Sunday GAS Party (secret santees.....be stalked here)

General Gear Discussion - effects, synths, etc.

Moderator: Ghost Hip

Post Reply
User avatar
misterstomach
FAMOUS
FAMOUS
Posts: 1610
Joined: Fri Apr 20, 2012 7:23 pm
Location: portland, or

Re: Sunday GAS Party(framing nailer shootout)

Post by misterstomach »

if you have a mitre saw that you like then it would make a lot more sense to me to get a table saw. then you can do pretty much anything with the two. a radial arm saw mostly replicates a lot of what you can do with a mitre saw, but in a less desirable way in my opinion, and you would still not be able to do what you need a table saw to do. i love the bosch table saw, if your going to drop some money on it.
ryan summit wrote:Damn these fuckin bullshit techherpes
User avatar
blakestree
IAMILF
IAMILF
Posts: 2305
Joined: Fri Dec 05, 2014 3:36 pm
Location: Savannah, GA USA

Re: Sunday GAS Party(framing nailer shootout)

Post by blakestree »

Image

Image
While leaves shall fall, do branches intertwine, that we remain bound.

Blake's Tree
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: Sunday GAS Party(framing nailer shootout)

Post by Iommic Pope »

ryan summit wrote:some helpful shit, and then some shit that really must have sucked to go through.


:hug:

Dude, that fucking sucks. I feel like an asshole for not posting that Trinity out sooner now. I wanted to have it out to you the day before my surgery but I got tied up getting organised for everything and I've just lost days since.
It is going out tomorrow.
Doctor cleared me to drive again today, so I don't have to lean on my wife to drag my ass around.
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
User avatar
kbit
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11509
Joined: Sun Dec 12, 2010 1:16 pm
Location: Philadelphia

Re: Sunday GAS Party(framing nailer shootout)

Post by kbit »

ryan summit wrote:my ex teamed with her pre-me ex and robbed my shit
she kicked me out
then head fucked me to keep me pre-occupied
while the other peice of shit sole my stuff
they had it all on craigslist that day
with there names and phone numbers in the posting
people that steal tools are the lowest forms of feces


:cry: :hug: i'm sorry duder
D.o.S. wrote:I'm fucking stupid and no one should operate under any other premise.
User avatar
KaosCill8r
IAMILF
IAMILF
Posts: 2906
Joined: Wed Dec 25, 2013 9:01 pm

Re: Sunday GAS Party(framing nailer shootout)

Post by KaosCill8r »

ryan summit wrote:the new compressor had to be boxlike
so it could end up under a pile of shit
if it wasnt for that id love a little senco
all the fuckin plumbing gets knocked outta whack
kind of limited my choices
recooperating from thieving crapsnatches sucks balls
my ex teamed with her pre-me ex and robbed my shit
she kicked me out
then head fucked me to keep me pre-occupied
while the other peice of shit sole my stuff
they had it all on craigslist that day
with there names and phone numbers in the posting
people that steal tools are the lowest forms of feces
that hitachi angled 15g is on my list this year
i did a shit ton of face-nailed cedar siding this year
totally wished i had that thing
i did get the hitachi 16g stapler though for the shake
bad-ass but what else im gonna use it for?
i guess i can use it for lap siding

Fuck that. I would of had a friend call and organise a meeting saying they were going to buy it all from them. Then you show up with the police. :idk: Get your stuff back and fuck them at the same time. Win win. Or just show up with a lead pipe or a motorbike chain and beat them both within an inch of thier lives, then take your tools back. Again win win.
User avatar
ryan summit
Supporter
Supporter
Posts: 6194
Joined: Wed Jun 06, 2012 10:11 am
Location: charlton hestons cold dead hands,exit 21,NY

Re: Sunday GAS Party(framing nailer shootout)

Post by ryan summit »

didnt mean to whahhh up the gasparty
that was 5 years ago
ive bounced back
above and beyond now
buying something you already busted ass once for, though
goddammit
im sure people go through it with music gear, too
fuck all that stuff
and pope dont hurt yourself tryin to run to the P.O.
cant wait to try out that trinity though

and on to radial arm saws
if you need it, nothing compares
i have the newer makita 12" miter saw
its got a 16" reach on it
suppose to replace the need for radial arm saw
it doesnt
its fucking awesome
but if you gotta cut a countertop
believe me its a pain in the balls
a cabinet shop should have a radial and a table
but if you gotta choose between the two
table saw
radial arm saw does one thing=crosscut
table saw can do both, but has its limitations as well
so get a table saw
besides people be throwing radials away soon
wait for garage sale season
next miters are gonna have 24" reach and a 10" fence
and fit in your nail pouch
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: Sunday GAS Party(framing nailer shootout)

Post by Iommic Pope »

ryan summit wrote:im sure people go through it with music gear, too
fuck all that stuff
and pope dont hurt yourself tryin to run to the P.O.
cant wait to try out that trinity though

Am there, doin that.
It's ok man, I was waiting for one more thing to make the package complete and it's in there now.
Just gotta write you up a suitable love-letter.
Can't send an ILF package without a love-letter.

Now I'm not sure if love letter needs to be hyphenated...
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
User avatar
ryan summit
Supporter
Supporter
Posts: 6194
Joined: Wed Jun 06, 2012 10:11 am
Location: charlton hestons cold dead hands,exit 21,NY

Re: Sunday GAS Party(framing nailer shootout)

Post by ryan summit »

i think love-letter means:
a person who lets love flow freely.....brother(dirty hippy voice)

"pope is a love-letter, what with his love letters and whatnot"
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: Sunday GAS Party(framing nailer shootout)

Post by Iommic Pope »

I see what you did there.

Have we discussed you writing a dictionary?
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
User avatar
DocD3F4U17
interested
interested
Posts: 48
Joined: Sat Feb 14, 2015 8:23 pm

Re: Sunday GAS Party(framing nailer shootout)

Post by DocD3F4U17 »

sunday GAS party? who wants some beef in their corn hole?
your lonely pedal would be better off in a noobs hands
User avatar
kbit
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11509
Joined: Sun Dec 12, 2010 1:16 pm
Location: Philadelphia

Re: Sunday GAS Party(framing nailer shootout)

Post by kbit »

ryan summit wrote:didnt mean to whahhh up the gasparty
that was 5 years ago


Oh I missed that part hahah
D.o.S. wrote:I'm fucking stupid and no one should operate under any other premise.
User avatar
Chankgeez
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 42163
Joined: Tue Oct 11, 2011 1:40 am
Location: https://www.youtube.com/watch?v=FGhbeHujNZQ youtube.com/watch?v=V-2l7kkBURc

Re: Sunday GAS Party(framing nailer shootout)

Post by Chankgeez »

[youtube]http://www.youtube.com/watch?v=-an6FUtGS-M[/youtube]
psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
…...........................…
Sweet dealin's: here
"Now, of course, Strega is not a Minimoog… and I am not Sun Ra" - dude from MAKENOISE
#GreenRinger
User avatar
kbit
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11509
Joined: Sun Dec 12, 2010 1:16 pm
Location: Philadelphia

Re: Sunday GAS Party(framing nailer shootout)

Post by kbit »

Day dreaming of mustang bass -> apacolypse -> ghost delay -> Mini.
D.o.S. wrote:I'm fucking stupid and no one should operate under any other premise.
User avatar
ryan summit
Supporter
Supporter
Posts: 6194
Joined: Wed Jun 06, 2012 10:11 am
Location: charlton hestons cold dead hands,exit 21,NY

Re: Sunday GAS Party(framing nailer shootout)

Post by ryan summit »

we played out on friday
my setup sounds awesome in an open room
im not gonna change anything for a while
just more practice
forgot that feeling of bein in front of people
its good when its good
but when its bad.....icky

im in desperate neet of a TDR Meter
for a job i did
go here if interested or can help
viewtopic.php?f=42&t=45690
thanks
User avatar
neonblack
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Sunday GAS Party(framing nailer shootout)

Post by neonblack »

kbithecrowing wrote:Day dreaming of mustang bass -> apacolypse -> ghost delay -> Mini.


I have to run my Mini early in the chain. If I run it after other stuff it gets all muffly.
Post Reply