Re: Perf substitutes?
Posted: Wed Feb 23, 2011 6:07 pm
Radioshack has saved my ass a few times despite the prices
D3rP wrote:I don't see why you couldn't get some from smallbear.
Page 2 of 3
Re: Perf substitutes?
Posted: Fri Feb 25, 2011 12:42 pm
Re: Perf substitutes?
Posted: Fri Feb 25, 2011 6:06 pm
so to do something point to point i could just take a piece of wood with nails in a grid pattern and solder shit that way?
and just make the radioshack order yours stuff or use teh internet.
and just make the radioshack order yours stuff or use teh internet.
Re: Perf substitutes?
Posted: Sat Feb 26, 2011 2:30 am
No, sirs. THIS is ho you do point to point pedals:
Bitches.
Bitches.
Re: Perf substitutes?
Posted: Sun Feb 27, 2011 4:00 am
...niceRe: Perf substitutes?
Posted: Sun Feb 27, 2011 5:08 am
McSpunckle wrote:No, sirs. THIS is ho you do point to point pedals:
Bitches.
This makes me hard.
Re: Perf substitutes?
Posted: Sun Feb 27, 2011 6:12 pm
McSpunckle wrote:No, sirs. THIS is ho you do point to point pedals:
Bitches.
That's fuckin hawt.
Re: Perf substitutes?
Posted: Sun Feb 27, 2011 9:22 pm
Yes, that is sexy, yet 0ohm resistor = why?
Re: Perf substitutes?
Posted: Mon Feb 28, 2011 1:52 am
D3rP wrote:Yes, that is sexy, yet 0ohm resistor = why?
I have them because I use them on double-sided perf boards, where they jumper has to go over the power, so the body helps avoid shorting. They're something like a cent a piece, so it's not like it's a real expense.
I just use a solid wire jumper on the bottom of the board now, though. It's easier to do it on top if you only have one, but I changed the layout so it has 3 now... so yeah.
Re: Perf substitutes?
Posted: Mon Feb 28, 2011 2:07 am
McSpunckle... you should check your email 
Re: Perf substitutes?
Posted: Mon Feb 28, 2011 2:12 am
BUT MY EMAIL IS ALL THE WAY ON THAT OTHER WEBSITE. RAWR.
Re: Perf substitutes?
Posted: Tue Mar 01, 2011 11:23 pm
McSpunckle wrote:No, sirs. THIS is ho you do point to point pedals:
Bitches.
Here's how I do them -
Re: Perf substitutes?
Posted: Wed Mar 02, 2011 1:05 am
Is that stuff around the wires necessary? D:'
Re: Perf substitutes?
Posted: Wed Mar 02, 2011 9:30 am
cloth wires=vintage mojo
shielded wires result in less radio interference.
shielded wires result in less radio interference.