Saving the quantisation from the previous time you used the pedal, will that come in a later revision? That's the killer feature for me, so if the answer is yes, should I do this upgrade then the next, or can I skip it and just do the next?
Gone Fission wrote: ↑Thu Oct 24, 2024 2:21 pm
That’s quarter-assed at best.
Ya but i don't know when it will get done, soon hopefully. There is a minor bug with this feature at the moment so i did not include it. This is the update for now. You should check it out either way I'd say if you can, it's useful for me for feedback purposes.
So I picked up an EHX 8 step program pretty cheap and hooked it up to the CT5. Still messing around with it, but it seems like it has a lot of potential.
Yes we are having a bit of logistics issues with shipping but a bunch have gone out now. I will enter the tracking info on the weekend, the way it is setup now I have to manually enter them into the store. We are shipping in order of the balance payment.
THanks
s
Has someone his tracking number or received the pedal yet?
Fuzzonaut about the RM-1N:
"Amp in a box"?
No, there's no amp in there - tone fairies and feedback goblins live inside this box.
ponyteeth wrote:So I picked up an EHX 8 step program pretty cheap and hooked it up to the CT5. Still messing around with it, but it seems like it has a lot of potential.
this so hard!
I'm curious about how you would set the trimpots via software or did I miss that? and is there a way to change where the mode 3 overdubs?
I'm curious about how you would set the trimpots via software or did I miss that? and is there a way to change where the mode 3 overdubs?
You don't have to set the trimpots in software, the software simply does what the offset trim pot used to. You cannot set the offset anymore manually. There is no reason to want to do so anyway. The gain trimpot is unaffected, and not controlled in software at all in either firmware revision.
Mode 3 now overdubs at the point where the DIR 1 head is. this is deemed the most logical earlier in this thread, and from using it i think it is actually better this way. Since the DIR 1 is always on you can know where the punch in will happen. There is no way to change this.
jwar wrote:Hey so does this mean the next run of pre-orders will be soon? Sorry if you already answered this.
We will do another run in the near future, but we are not opening the orders just yet as we are still shipping out the current run.
multi_s wrote:You don't have to set the trimpots in software, the software simply does what the offset trim pot used to. You cannot set the offset anymore manually. There is no reason to want to do so anyway. The gain trimpot is unaffected, and not controlled in software at all in either firmware revision. Mode 3 now overdubs at the point where the DIR 1 head is. this is deemed the most logical earlier in this thread, and from using it i think it is actually better this way. Since the DIR 1 is always on you can know where the punch in will happen. There is no way to change this.
ok thanks hotdogman I'm really amped on coffee and trying to stay focused and finish this project I'll go back tomorrow and sift through the rest of the pages just poking around at this stage of things still and anyone else watching this show? [youtube]http://www.youtube.com/watch?v=V3HvB3IRpAg[/youtube]
Paul_C wrote:update done, but no time to see if it still works I'll check in the morning
It lives !
Unfortunately I had moved the knobs while carrying out the update and the subsequent sound was so much fun I never got round to seeing what the tweaks do - I'll assume that I'll be in for some nice surprises when I get round to it
multi_s wrote:You don't have to set the trimpots in software, the software simply does what the offset trim pot used to. You cannot set the offset anymore manually. There is no reason to want to do so anyway. The gain trimpot is unaffected, and not controlled in software at all in either firmware revision. Mode 3 now overdubs at the point where the DIR 1 head is. this is deemed the most logical earlier in this thread, and from using it i think it is actually better this way. Since the DIR 1 is always on you can know where the punch in will happen. There is no way to change this.
ok thanks hotdogman I'm really amped on coffee and trying to stay focused and finish this project I'll go back tomorrow and sift through the rest of the pages just poking around at this stage of things still and anyone else watching this show? [youtube]http://www.youtube.com/watch?v=V3HvB3IRpAg[/youtube]
yes - very big fan of r/m.
Gonna try this update out tonight - I was playing without pedals for the last while, but I plugged my board back in last night and started working in on some ct5 loops for a project, so this is good timing, haha.
and hooked it up to the CT5. 
Sorry if you already answered this.
I'll check in the morning 
