Theremin controlled Volume "Knob" in my guitar.

Do-it-yourself pedal building

Moderator: Ghost Hip

Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!
Post Reply
User avatar
Inertia
committed
committed
Posts: 226
Joined: Tue Oct 20, 2009 9:18 am
Location: Manhattan, Illinous

Theremin controlled Volume "Knob" in my guitar.

Post by Inertia »

I plan on taking the Tone knob out of my guitar and replacing it with a Sensor of sorts in which When I pull out my Volume knob, the sensor becomes active as a Theremin-like volume control. This being that the closer ones hand is to the sensor, the lower the volume, and the farther you are the louder you are until original input gain.
This hopefully would be a useful tool for Swelling, Manual tremolo, and Feedback loop control.


Does anyone have any ideas on this, or any idea on how I would go about doing such? :idk:
User avatar
Kellanium
experienced
experienced
Posts: 656
Joined: Sun Jan 03, 2010 12:02 am
Contact:

Re: Theremin controlled Volume "Knob" in my guitar.

Post by Kellanium »

Photoresistor? :idk:
snipelfritz wrote:We're like those friends who are a bad influence and get you to do drugs...and they're REALLY good drugs.
Fuzzy Fred wrote: YO IM OUT OF LUBE IS IT OKAY IF I USE WALMART BRAND CRISCO?

Get in on the ILF Mixtape Swap!
User avatar
Inertia
committed
committed
Posts: 226
Joined: Tue Oct 20, 2009 9:18 am
Location: Manhattan, Illinous

Re: Theremin controlled Volume "Knob" in my guitar.

Post by Inertia »

The problem is that light control would be too difficult to manage, as I intend on using this live :(
And During Slower songs where Manual tremolo and swelling would be used a lot, chances are they will dim down the lights.

I was thinking there is a way to take the tone pot, remove it from the circuit, and then in turn use it as the "pole" on which the theremin senses.
User avatar
Scruffie
Admin
Admin
Posts: 4647
Joined: Sun Jun 07, 2009 8:46 pm
Location: London.. ish, Uk

Re: Theremin controlled Volume "Knob" in my guitar.

Post by Scruffie »

Then you're looking at an active circuit... and theremins aint simple, even the simple ones... how about a slide pot instead... that'd be easier.

Otherwise you want to build yourself an Z.Vex trem probe into your guitar... then have a copper scratch plate.
User avatar
Astricii
experienced
experienced
Posts: 868
Joined: Mon Oct 12, 2009 12:27 pm
Location: Denver CO
Contact:

Re: Theremin controlled Volume "Knob" in my guitar.

Post by Astricii »

[youtube]http://www.youtube.com/watch?v=lVqpCQLl67A[/youtube]

It'll run ya 270 but with a volume pedal and some delay. your volume knob can be used as a theremin. and you get a nice fuzz pedal to boot. :animal:
Achtane wrote:The whole super-submissive robotic dying cat girl with mosaic for junk thing...BLEH
User avatar
Inertia
committed
committed
Posts: 226
Joined: Tue Oct 20, 2009 9:18 am
Location: Manhattan, Illinous

Re: Theremin controlled Volume "Knob" in my guitar.

Post by Inertia »

Astricii wrote:[youtube]http://www.youtube.com/watch?v=lVqpCQLl67A[/youtube]

It'll run ya 270 but with a volume pedal and some delay. your volume knob can be used as a theremin. and you get a nice fuzz pedal to boot. :animal:

Not at all what i was looking to do if you read above but still rather intriguing :idk:

Does anyone know of a guitar - mountable battery powered Light source of small stature?
I might have to go with a Photoresistor + Light deal.
User avatar
Scruffie
Admin
Admin
Posts: 4647
Joined: Sun Jun 07, 2009 8:46 pm
Location: London.. ish, Uk

Re: Theremin controlled Volume "Knob" in my guitar.

Post by Scruffie »

Yeah an LED and a Watch Battery with a switch to break it.. bout as small as you'll get for mountable light source, look for the battery type with the best mA hour though and use that... probably AAs, you might need a resistor in there too depending on your LEDs rating and to limit its current draw.
User avatar
Inertia
committed
committed
Posts: 226
Joined: Tue Oct 20, 2009 9:18 am
Location: Manhattan, Illinous

Re: Theremin controlled Volume "Knob" in my guitar.

Post by Inertia »

Scruffie wrote:Yeah an LED and a Watch Battery with a switch to break it.. bout as small as you'll get for mountable light source, look for the battery type with the best mA hour though and use that... probably AAs, you might need a resistor in there too depending on your LEDs rating and to limit its current draw.

I might go for taking apart one of those lights that are used for Photoresistors in pedals such as the peep, eye of god and the sort.
I see them on boards very often on HCFX, anyone know what i am taking about?
User avatar
Astricii
experienced
experienced
Posts: 868
Joined: Mon Oct 12, 2009 12:27 pm
Location: Denver CO
Contact:

Re: Theremin controlled Volume "Knob" in my guitar.

Post by Astricii »

Inertia wrote:
Astricii wrote:[youtube]http://www.youtube.com/watch?v=lVqpCQLl67A[/youtube]

It'll run ya 270 but with a volume pedal and some delay. your volume knob can be used as a theremin. and you get a nice fuzz pedal to boot. :animal:

Not at all what i was looking to do if you read above but still rather intriguing :idk:

Does anyone know of a guitar - mountable battery powered Light source of small stature?
I might have to go with a Photoresistor + Light deal.



Doh! just re-read the post. :lol:
Achtane wrote:The whole super-submissive robotic dying cat girl with mosaic for junk thing...BLEH
User avatar
hclapp219
Supporter
Supporter
Posts: 1991
Joined: Thu Jun 25, 2009 12:17 pm
Location: DC

Re: Theremin controlled Volume "Knob" in my guitar.

Post by hclapp219 »

Sounds like you want a Zvex Drip Guitar but with a trem probe in the pick guard instead of a wah probe.
Post Reply