RM-1N

intothegroove · Post by **intothegroove** » Thu Sep 04, 2014 6:20 pm

MrNovember wrote:Holy shit. Loving this pedal so much!
Pretty sure I can replace most of my pedal board with it

I'm so glad you like it dude! it was nice meeting you! Thank you again! :hug:

intothegroove · Post by **intothegroove** » Fri Sep 05, 2014 4:19 pm

I just wanted to update everyone.....

I know a lot of people are waiting to grab a RM-1N, I am still waiting for the enclosures and I honestly don't have a solid time frame of when they'll be delivered :idk:

I feel horrible for keeping people waiting, especially people who had payed for theirs already

The RM-1N that's pictured on the previous page was the first version prototype that I had upgraded to the second version and sold it to a local guy for much less then what I'm selling the production one.

If anybody is really eager to get one, I am totally willing to build them one in the stealth black look, with my nameplate on the enclosure, I will include control explanations in the manuals. Again I apologize for the long wait everybody, I feel really bad about all this :cry:

nevada · Post by **nevada** » Fri Sep 05, 2014 6:02 pm

Does v2 look different than the acid etch?

intothegroove · Post by **intothegroove** » Fri Sep 05, 2014 6:21 pm

It would look like this, also I am planning on putting my pedals in the same size enclosure as the Squarewave Generator which is much smaller,

it's a 1590J

Length: 5.71
Width: 3.74
Depth: 1.77

The measurements are in inches, and with my Echo Degrader PCB on the way I had it made to fit this enclosure size

I am going to try and fit all my pedals with PCB's into this enclosure eventually. It will save a lot of pedal board space which a few people have been asking me about smaller enclosures. So I think I will be making the RM-1N's in a smaller enclosure if anyone wants one right away, I can also still do it in the bigger one

nevada · Post by **nevada** » Fri Sep 05, 2014 8:18 pm

Gotcha. So v1 is the Acid Etch and v2 is the black box?

intothegroove · Post by **intothegroove** » Sat Sep 06, 2014 8:50 am

I originally made just the all black prototype of the v1 and later on found more options in the circuit. The difference between v1 and v2 is, reverb depth, increased reverb and feedback length, hi/low frequency toggle switch, feedback on a momentary footswitch to get oscillation fast, deeper tone control, and a better layout of the controls. These etched enclosures that I'm waiting on are the only ones that have been made for this pedal, but I am looking at other ways of designing these, waiting on some materials in the mail

Jwar · Post by **Jwar** » Sat Sep 06, 2014 12:27 pm

Hey guys. The delay is my fault. I've been basically, let's just call it sick, for the last month or longer. Been having a lot of anxiety issues and not having been able to do much. So these are done and heading out the door. I had to do a some last minute changes to one or two of them.

Just so you know, they are not acid etched. They are laser engraved. I no longer do acid etching. Still call it the Acid Splash though.

So I'm really sorry about the delays.

nevada · Post by **nevada** » Sat Sep 06, 2014 2:41 pm

My bad. Acid Splash.

doommeow · Post by **doommeow** » Sat Sep 06, 2014 5:28 pm

jwar wrote:Hey guys. The delay is my fault. I've been basically, let's just call it sick, for the last month or longer. Been having a lot of anxiety issues and not having been able to do much. So these are done and heading out the door. I had to do a some last minute changes to one or two of them.

Just so you know, they are not acid etched. They are laser engraved. I no longer do acid etching. Still call it the Acid Splash though.

So I'm really sorry about the delays.

I think many of us have been there, have loved ones that have been there, or both. Do whatcha need to do to take care of yourself fuzzbrother. :hobbes:

KaosCill8r · Post by **KaosCill8r** » Sun Sep 07, 2014 2:07 am

jwar wrote:Hey guys. The delay is my fault. I've been basically, let's just call it sick, for the last month or longer. Been having a lot of anxiety issues and not having been able to do much. So these are done and heading out the door. I had to do a some last minute changes to one or two of them.

Just so you know, they are not acid etched. They are laser engraved. I no longer do acid etching. Still call it the Acid Splash though.

So I'm really sorry about the delays.

I suffer crippling anxiety my self. Sucks to go through it. Hope your feeling better dude. :thumb:

intothegroove · Post by **intothegroove** » Sun Sep 14, 2014 3:47 pm

Just wanted to send an update, the enclosures should be here by next week! Tracking them along the way :joy:

Thank you everyone for being extremely patient, I really appreciate it! :hug:

intothegroove · Post by **intothegroove** » Sat Sep 20, 2014 9:04 pm

FINALLY!!! Here they are everyone!! I got them yesterday but let people who payed me already choose first. Sitting on their money, they deserve to choose first :joy:

So here are the rest of what's available, once they're gone, they're gone. If you would like to reserve one, you can reply to this thread with the number you would like to have and as I get them built I'll PM you when yours is ready

They all have distinct shades and characteristics to them but it's hard to see in the picture, but they are all unique. Thanks!

Claimed:

Darkfield - Done :yay:

moocher - Done :yay:

Uncle grandfather - Done :yay:

Ev_O))) - Done :yay:

grygrx - Done :yay:

doommeow · Post by **doommeow** » Sat Sep 20, 2014 9:58 pm

Surprised that green one is still there. Sexy as all get out.

intothegroove · Post by **intothegroove** » Sat Sep 20, 2014 9:59 pm

Darkfield has #4 :joy:

intothegroove · Post by **intothegroove** » Sat Sep 20, 2014 10:01 pm

doommeow wrote:Surprised that green one is still there. Sexy as all get out.

I'm sure it won't be hanging around to long :cool:

ilovefuzz.com

RM-1N

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)

Re: REVERB MACHINE - (RM-1N)