UG demos RM-1N with Shruti Box

Chankgeez · Post by **Chankgeez** » Tue Jun 17, 2014 10:39 pm

In the manual, Catalinbread says it's fine up to 18V. They say it increases your tonal options.

Uncle Grandfather · Post by **Uncle Grandfather** » Tue Jun 17, 2014 10:47 pm

Chankgeez wrote:In the manual, Catalinbread says it's fine up to 18V. They say it increases your tonal options.

thanks, i just checked the online site too

saw a picture of the pedal and it says 9-18v on it.

also just got an email about paying for my maude

Chankgeez · Post by **Chankgeez** » Tue Jun 17, 2014 10:52 pm

Uncle Grandfather · Post by **Uncle Grandfather** » Wed Jun 18, 2014 1:05 am

Hello, and thanks to reading instruction manuals I have a whole new appreciation of the Belle Epoch. First up was putting it in buffered mode, which sounds like a vastly improved version of the bypass mode, and also allows for trails after turning off the pedal. Next up was running at 18v instead of 9v which was a major improvement across the board.
Here with the MASF Raptio and a Jerms mkI.

[youtube]http://www.youtube.com/watch?v=UwOIF0_d7VA[/youtube]

Uncle Grandfather · Post by **Uncle Grandfather** » Wed Jun 18, 2014 1:11 am

Hi there, here is the Belle Epoch in buffered mode at 18v with a clari(not) with a creepy fingers fz-1.

[youtube]http://www.youtube.com/watch?v=yoITdS1ksDA[/youtube]

Uncle Grandfather · Post by **Uncle Grandfather** » Fri Jun 20, 2014 1:45 pm

Hello, here is the Dreadbox Sonic Bits Delay/Bitcrusher with a Korg SR-120

[youtube]http://www.youtube.com/watch?v=PvuCK7DhvZw[/youtube]

Uncle Grandfather · Post by **Uncle Grandfather** » Sun Jun 22, 2014 12:13 am

Hey, here is a look at the Industrialectric Squarewave Generator. Really cool fuzzy textures in this box.

[youtube]http://www.youtube.com/watch?v=fLF-5zRPokQ[/youtube]

Uncle Grandfather · Post by **Uncle Grandfather** » Sun Jun 22, 2014 12:29 am

Hey is a different look at the Squarewave Generator.

[youtube]http://www.youtube.com/watch?v=kqBcHluK9eY[/youtube]

Uncle Grandfather · Post by **Uncle Grandfather** » Mon Jun 23, 2014 5:49 am

Hiya, here is the Industrialectric Blackbox Overdrive and Squarewave Generator.

[youtube]http://www.youtube.com/watch?v=sQK6FBb8lok[/youtube]

Uncle Grandfather · Post by **Uncle Grandfather** » Mon Jun 23, 2014 4:57 pm

Hey there, here is the awesome Blackbox Overdrive.
[youtube]http://www.youtube.com/watch?v=4FfM6YHaiNE[/youtube]

intothegroove · Post by **intothegroove** » Mon Jun 23, 2014 6:28 pm

YES!!!! THANK YOU!

Uncle Grandfather · Post by **Uncle Grandfather** » Mon Jun 23, 2014 9:32 pm

Hey there, here is the gotta get one of these Reverb Machine with the Incinerator, no input signal.

[youtube]http://www.youtube.com/watch?v=IB2wOMV4MrE[/youtube]

Uncle Grandfather · Post by **Uncle Grandfather** » Tue Jun 24, 2014 12:36 am

Heylo, this is the seriously awesome Reverb Machine.

[youtube]http://www.youtube.com/watch?v=kCU2o1quGPM[/youtube]

nevada · Post by **nevada** » Tue Jun 24, 2014 8:29 am

UG, what causes the flanging sort of sound in the beginning of that last Reverb Machine demo?

MrNovember · Post by **MrNovember** » Tue Jun 24, 2014 8:37 am

The RM-1N sounds soo good. SO much gas!

ilovefuzz.com

UG demos RM-1N with Shruti Box

Re: UG demos Catalinbread Belle Epoch Tape Delay with Everyt

Re: UG demos Catalinbread Belle Epoch Tape Delay with Everyt

Re: UG demos Catalinbread Belle Epoch Tape Delay with Everyt

Re: UG demos Catalinbread Belle Epoch Tape Delay with Everyt

Re: UG demos Catalinbread Belle Epoch Tape Delay with Everyt

Re: UG demos Catalinbread Belle Epoch in buffered mode at 18

Re: UG demos Dreadbox Sonic Bits delay/bitcrusher

Re: UG demos Industrialectric Squarewave Generator

Re: UG demos Industrialectric Squarewave Generator

Re: UG demos Industrialectric Tourbox

Re: UG demos Industrialectric Tourbox

Re: UG demos Industrialectric Tourbox

Re: UG demos Industrialectric Tourbox

Re: UG demos Industrialectric Tourbox

Re: UG demos Industrialectric Tourbox