Doom Room 1 knob Muff Group DIY

[new05002]

For the 1uF cap you can sub with 470nF film cap, panasonic and that will be fine. Not a huge reduction in bass or anything

Here is the cap recommended on the PCB.

http://www.mouser.com/ProductDetail/WIM ... RWoDlA8%3d

Note, 1uF film caps like the ones on PPP or Mammoth will not fit, they are too wide.

[moose23]

Cheers Nick.

[AxAxSxS]

yeah, thats the one that's throwing me as well. I found a WIMA MKP4 1uf 400 volt, but no MKP2

[new05002]

I have only bought them from Mouser

[AxAxSxS]

[ryan summit]

it looks like all the domestics have been delivered
if someone hasnt gotten their pcbs yet
please get in touch with me
the tracking for the internationals says jamaica, ny
im guessing thats JFK airport
hopefully you guys get them soon
they said 7-10 days
let me know when that happens

if anyones interested in another round
let me know
if theres enough interest ill do it again
or i can pass it off
anyone wantiing to order their own
its a 3 board minimum
and your gonna need to install a program to read the file
i tried to do it without and it didnt work

other than that
its always a pleasure doin stuff with you guys
youd think organizing a bunch of creeps on the internet
would be a royal pain in the ass
turns out i may be the creepiest ass pain around

big ups to nick

[new05002]

I wanted to iterate a small thing here about this project. I do not believe this will be a problem with anyone but let me just clarify this since I have thought about it just today. This project is for personal use only, not for commercial use. I know that some people are going to build units for people in the doom room or this thread which is totally fine and its totally fine with me if you charge more to cover your time/effort/labor. However please do not use the pcb design I created to make your own units and sell them outside of here. If you want to make and sell your own units then just make a new pcb design. The schematic is open source of course since its just a LBMP scheme adapted for general use.

I would rather not get into a protracted fight over selling units with my pcb so if this looks like the case just contact me ahead of time and we can work it out.

[AxAxSxS]

I wanted to iterate a small thing here about this project. I do not believe this will be a problem with anyone but let me just clarify this since I have thought about it just today. This project is for personal use only, not for commercial use. I know that some people are going to build units for people in the doom room or this thread which is totally fine and its totally fine with me if you charge more to cover your time/effort/labor. However please do not use the pcb design I created to make your own units and sell them outside of here. If you want to make and sell your own units then just make a new pcb design. The schematic is open source of course since its just a LBMP scheme adapted for general use.

I would rather not get into a protracted fight over selling units with my pcb so if this looks like the case just contact me ahead of time and we can work it out.

I don't think anyone would want to incur the collective wrath of the doom rooms either.

[Iommic Pope]

Nah, it would be a brutal wrath to incur indeed.
I'm just gonna make a couple as Christmas gifts for mates.
I'm assuming that's cool?

[new05002]

yea totally fine

[Iommic Pope]

Sweet.

[John]

I know I'm late to the game,



but can I get one of these with tubes and a Klon switch?

[moose23]

I wanted to iterate a small thing here about this project. I do not believe this will be a problem with anyone but let me just clarify this since I have thought about it just today. This project is for personal use only, not for commercial use. I know that some people are going to build units for people in the doom room or this thread which is totally fine and its totally fine with me if you charge more to cover your time/effort/labor. However please do not use the pcb design I created to make your own units and sell them outside of here. If you want to make and sell your own units then just make a new pcb design. The schematic is open source of course since its just a LBMP scheme adapted for general use.

I would rather not get into a protracted fight over selling units with my pcb so if this looks like the case just contact me ahead of time and we can work it out.

Just in case anyone's wondering and for the sake of clarity seeing as I bought four, one is for myself, one for Samzagadan, one for Slomatic and one for a certain other Dunwich fanboy/good friend of mine that doesn't post here. All being done for costs and round about an hour of my time. I'll be very impressed if I can put one of these together in an hour but if I can then I'll charge less than an hour of my time..

[Iommic Pope]

I know I'm late to the game,



but can I get one of these with tubes and a Klon switch?

Fuck yeah dude, for warmer transparency when you want to play doomzlawyer styles.
Good for covering Sleep's Holy Mountain of Red Tape.

[Barracuda]

I know I'm late to the game,



but can I get one of these with tubes and a Klon switch?

As long as after the mods it's just another tubescrea.... errr, I mean, amp-like and responds to your guitar's volume knob.