Goodbye 24 Settings Thread!
Moderator: multi_s
-
- committed
- Posts: 270
- Joined: Wed Dec 07, 2011 12:06 pm
- Location: Alhambra, CA
Re: Goodbye 24 Settings Thread!
One of the trimpots is input gain, correct? What's the other one?
EJ
Bassed in Los Angeles
@punkcrushband @painbehavior @queeraspunk @puzzytuesday
Good deals: Tom Dalton, lawrence scaduto, Ryan, Dan DubblEwe, multi_s, MaxMaps, ianmarks, cantremember
Bassed in Los Angeles
@punkcrushband @painbehavior @queeraspunk @puzzytuesday
Good deals: Tom Dalton, lawrence scaduto, Ryan, Dan DubblEwe, multi_s, MaxMaps, ianmarks, cantremember
- multi_s
- IAMILF
- Posts: 2095
- Joined: Mon Feb 15, 2010 9:00 pm
Re: Goodbye 24 Settings Thread!
On the Rev D board the other trim pot is used adjust the DC offset of the signal going into the ADC. I don't recommend touching it.
- phantasmagorovich
- Supporter
- Posts: 6983
- Joined: Sun Feb 28, 2010 2:31 pm
- Location: Cologne, Germany
Re: Goodbye 24 Settings Thread!
Dude, can you record the GB24 in a feedback loop? I was wondering if I should once again get a FB Looper for this exact reason.
/// OWWL /// DAZZLE SHIPS
-
- committed
- Posts: 270
- Joined: Wed Dec 07, 2011 12:06 pm
- Location: Alhambra, CA
Re: Goodbye 24 Settings Thread!
Yeah, though I don't know when I'll get to it, any request for settings/instrument etc? Once again, volume's punishing if mix isn't full wet, but with other high volume shit like drums going it's not as much of a problem as long as your cab's hardy.
EJ
Bassed in Los Angeles
@punkcrushband @painbehavior @queeraspunk @puzzytuesday
Good deals: Tom Dalton, lawrence scaduto, Ryan, Dan DubblEwe, multi_s, MaxMaps, ianmarks, cantremember
Bassed in Los Angeles
@punkcrushband @painbehavior @queeraspunk @puzzytuesday
Good deals: Tom Dalton, lawrence scaduto, Ryan, Dan DubblEwe, multi_s, MaxMaps, ianmarks, cantremember
- phantasmagorovich
- Supporter
- Posts: 6983
- Joined: Sun Feb 28, 2010 2:31 pm
- Location: Cologne, Germany
Re: Goodbye 24 Settings Thread!
Just some guitar noodling, set to a rainbow-machine like arpeggio (backwards), and maybe also with a very long and very short buffer for faux delay and faux harmonizer tones. That would be great!
But isn't volume an issue with most feedback loops?
But isn't volume an issue with most feedback loops?
/// OWWL /// DAZZLE SHIPS
- Uncle Grandfather
- IAMILFFAMOUS
- Posts: 8550
- Joined: Mon Oct 14, 2013 7:34 pm
Re: Goodbye 24 Settings Thread!
phantasmagorovich wrote:But isn't volume an issue with most feedback loops?
I always put a volume pedal after my feedback looper for such oscillations. a compressor might work too.
- phantasmagorovich
- Supporter
- Posts: 6983
- Joined: Sun Feb 28, 2010 2:31 pm
- Location: Cologne, Germany
Re: Goodbye 24 Settings Thread!
Uncle Grandfather wrote:phantasmagorovich wrote:But isn't volume an issue with most feedback loops?
I always put a volume pedal after my feedback looper for such oscillations. a compressor might work too.
I just brace myself and hold my breath before kicking it on. Works as well.
/// OWWL /// DAZZLE SHIPS
- Uncle Grandfather
- IAMILFFAMOUS
- Posts: 8550
- Joined: Mon Oct 14, 2013 7:34 pm
Re: Goodbye 24 Settings Thread!
phantasmagorovich wrote:Uncle Grandfather wrote:phantasmagorovich wrote:But isn't volume an issue with most feedback loops?
I always put a volume pedal after my feedback looper for such oscillations. a compressor might work too.
I just brace myself and hold my breath before kicking it on. Works as well.

-
- committed
- Posts: 270
- Joined: Wed Dec 07, 2011 12:06 pm
- Location: Alhambra, CA
Re: Goodbye 24 Settings Thread!
Yeah volume's often an issue, I just like noting when it's not. I always wondered why floopers don't come with an output knob.
EJ
Bassed in Los Angeles
@punkcrushband @painbehavior @queeraspunk @puzzytuesday
Good deals: Tom Dalton, lawrence scaduto, Ryan, Dan DubblEwe, multi_s, MaxMaps, ianmarks, cantremember
Bassed in Los Angeles
@punkcrushband @painbehavior @queeraspunk @puzzytuesday
Good deals: Tom Dalton, lawrence scaduto, Ryan, Dan DubblEwe, multi_s, MaxMaps, ianmarks, cantremember
- LaoWiz
- Supporter
- Posts: 2034
- Joined: Wed Apr 14, 2010 4:03 pm
Re: Goodbye 24 Settings Thread!
I just got one of these in a trade and it is the coolest pedal EVER! The box came today and I played it clean for 5 minutes. Got so many awesome sounds in the first sitting. In the 2nd and 3rd sittings I pumped my Warmjet into it and its so awesome. The only bad thing about it is there are too many good sounds. I want like three more. Seriously. This pretty much covers what I like about the PLL and has a plethora of other worldly sounds in addition. Thank you, Scott. I love you for creating this contraption. Absolutely love it!
Most active on Instagram
Mo Destinations:
Laowiz Big Cartel
Reverb Shop
Ebay Shop for Vintage Parts, Test Equipment, vintage radios
Shark Tank
Build Archive
Mo Destinations:
Laowiz Big Cartel
Reverb Shop
Ebay Shop for Vintage Parts, Test Equipment, vintage radios
Shark Tank
Build Archive
- D.o.S.
- IAMILFFAMOUS
- Posts: 29874
- Joined: Sun Jul 03, 2011 8:47 am
- Location: Ewe-Kay
Re: Goodbye 24 Settings Thread!
LaoWiz wrote:I just got one of these in a trade and it is the coolest pedal EVER! The box came today and I played it clean for 5 minutes. Got so many awesome sounds in the first sitting. In the 2nd and 3rd sittings I pumped my Warmjet into it and its so awesome. The only bad thing about it is there are too many good sounds. I want like three more. Seriously. This pretty much covers what I like about the PLL and has a plethora of other worldly sounds in addition. Thank you, Scott. I love you for creating this contraption. Absolutely love it!
Just got mine today also (thanks again, psychedelicrelic), and I'm echoing this. Kind of wish the expression control was for the mix, but it saves me having to buy a footpedal, so that's fine.
Gonna have to play with the input gain, though--my dry signal's completely swamped at about 3:00
- multi_s
- IAMILF
- Posts: 2095
- Joined: Mon Feb 15, 2010 9:00 pm
Re: Goodbye 24 Settings Thread!
cool, good job everyone. hoping to release sounds from the next rev in the coming weeks. expression pedal assignable to any knob _except_mix_. 

- skullservant
- IAMILFFAMOUS
- Posts: 16575
- Joined: Wed Dec 28, 2011 12:55 am
- multi_s
- IAMILF
- Posts: 2095
- Joined: Mon Feb 15, 2010 9:00 pm
Re: Goodbye 24 Settings Thread!
ya it should be pretty good. i had to finish some other work the last few weeks but hopefully it will wrap up today. Another quadrophonic deal, i believe this one will have a home somewhere in sweden


- doommeow
- IAMILF
- Posts: 2021
- Joined: Fri Oct 04, 2013 3:37 pm
Re: Goodbye 24 Settings Thread!
Don't know what that is - but I want one