So a certain delay pedal that I have gets used frequently on a daily basis, the problem is that whenever I set on the bypass footswitch there's a noticable volume popping sound and just detracts from the atmosphere when playing and it's just an annoying sound. It's currently in my FX Loop.
I'm going to be stupid and ask for some advice about these sort of things. Cables? Bad wiring? Powersupply?
Cheers.
What to do with pedals with a loud bypass?
Moderator: Ghost Hip
- Andrew
- IAMILF

- Posts: 2748
- Joined: Tue Sep 20, 2011 3:43 am
- Location: Sydney, Auslandia
- oldangelmidnight
- IAMILFFAMOUS

- Posts: 3750
- Joined: Sat Aug 08, 2009 12:17 pm
- Location: Northampton, MA
Re: What to do with pedals with a loud bypass?
Does it pop every time or just the first time after you turn it on?
- 2+2=5
- interested

- Posts: 45
- Joined: Sun Jun 23, 2013 11:32 pm
Re: What to do with pedals with a loud bypass?
some true bypass problem...
switch it fast for several times may solve this, just maybe……
switch it fast for several times may solve this, just maybe……
huuuuge noizy world
-
Tristan
- Supporter

- Posts: 3051
- Joined: Wed Feb 27, 2013 8:23 pm
- Location: Harlem, The Netherlands
Re: What to do with pedals with a loud bypass?
I have a pedal that does this too, all the time.
I'm also curious how you could fix this, put in a new switch maybe?
Another thing I noticed or read somewhere is that pedals that have this problem are generally true bypass, it's one of the disadvantages of true bypass.
I'm also curious how you could fix this, put in a new switch maybe?
Another thing I noticed or read somewhere is that pedals that have this problem are generally true bypass, it's one of the disadvantages of true bypass.
good deals with: the_brow, phantasmagorovich, alexsga, DarkAxel, goroth, The Wood Wizard, Tendollarcat, vbps, monkeydancer, intothegroove, Brobee
- multi_s
- IAMILF

- Posts: 2098
- Joined: Mon Feb 15, 2010 9:00 pm
Re: What to do with pedals with a loud bypass?
you can try to add a pull down resistor from the input/output cap to ground. somethign big, like 1M.
if you google this you will find many discussions on diy forums regarding this exact issue. Its usually curable.
s
if you google this you will find many discussions on diy forums regarding this exact issue. Its usually curable.
s
- 2+2=5
- interested

- Posts: 45
- Joined: Sun Jun 23, 2013 11:32 pm
Re: What to do with pedals with a loud bypass?
Tristan wrote:I have a pedal that does this too, all the time.
I'm also curious how you could fix this, put in a new switch maybe?
Another thing I noticed or read somewhere is that pedals that have this problem are generally true bypass, it's one of the disadvantages of true bypass.

huuuuge noizy world
- JohnnyC
- committed

- Posts: 322
- Joined: Thu Feb 25, 2010 5:14 am
- Location: Perth Western Australia
- Contact:
Re: What to do with pedals with a loud bypass?
another thing ot consider...not all fx loops are the same.
bufferend/non buffered, impendance levels...
does the pedal pop in the front end?
bufferend/non buffered, impendance levels...
does the pedal pop in the front end?
ANARCHY AUDIO AUSTRALIA (Hand wired and assembled effects from the west coast of Australia)
http://www.anarchyaudioaustralia.com
http://www.facebook.com/pages/Anarch...35159009874965
http://soundcloud.com/anarchy-audio-australia
http://www.anarchyaudioaustralia.com
http://www.facebook.com/pages/Anarch...35159009874965
http://soundcloud.com/anarchy-audio-australia
-
Tristan
- Supporter

- Posts: 3051
- Joined: Wed Feb 27, 2013 8:23 pm
- Location: Harlem, The Netherlands
Re: What to do with pedals with a loud bypass?
multi_s wrote:you can try to add a pull down resistor from the input/output cap to ground. somethign big, like 1M.
if you google this you will find many discussions on diy forums regarding this exact issue. Its usually curable.
s
Thanks Scott, I guess I'll have to take it to the fx doctor then.
The funny thing is not every pedal does it apparently (not even if it's another specimen of the exact same pedal, mine is a Lovepedal Pickle Vibe) so that makes it quite weird.
Last edited by Tristan on Tue Jul 09, 2013 3:30 am, edited 2 times in total.
good deals with: the_brow, phantasmagorovich, alexsga, DarkAxel, goroth, The Wood Wizard, Tendollarcat, vbps, monkeydancer, intothegroove, Brobee
-
Tristan
- Supporter

- Posts: 3051
- Joined: Wed Feb 27, 2013 8:23 pm
- Location: Harlem, The Netherlands
Re: What to do with pedals with a loud bypass?
2+2=5 wrote:Tristan wrote:I have a pedal that does this too, all the time.
I'm also curious how you could fix this, put in a new switch maybe?
Another thing I noticed or read somewhere is that pedals that have this problem are generally true bypass, it's one of the disadvantages of true bypass.
What are you getting at?

good deals with: the_brow, phantasmagorovich, alexsga, DarkAxel, goroth, The Wood Wizard, Tendollarcat, vbps, monkeydancer, intothegroove, Brobee
- multi_s
- IAMILF

- Posts: 2098
- Joined: Mon Feb 15, 2010 9:00 pm
Re: What to do with pedals with a loud bypass?
JohnnyC wrote:another thing ot consider...not all fx loops are the same.
bufferend/non buffered, impendance levels...
does the pedal pop in the front end?
Tristan wrote:Thanks Scott, I guess I'll have to take it to the fx doctor then.
The funny thing is not every pedal does it apparently (not even if it's another specimen of the exact same pedal, mine is a Lovepedal Pickle Vibe) so that makes it quite weird.
Ya part of what makes it 'weird' is that it likely will get better/worse depending on whats plugged in in front/behind the pedal. Perhaps that's why some people report problems and others don't. Basically what JC said, it could be caused by a combination of things. |f you can find a schematic i could probbaly make a better guess as to whether or not adding pull downs will help before you pay someone to do the mod.