Let's see your PEDAL BOARD!

[kbit]

I decided on an order for everything. This the most straight-forward layout I've ever had. Only two of them are oriented weird!

Like, yeah, I'd totally rock that board, but dude... your guitar. Those controls & reppin' MST3K? You rock.

[Jero]

this is me today
was having trouble getting appropriate heavies with the 7 string but Bad Monkey into Gloom drive is flipping sick

How do you like that pulsar?

Pulsar is awesome, really sweet sounding trem, sounds great with dirt

Good to hear. I remember being fond of the one you have when I built it

[01010111]

Thanks! MST3K is the BEST! I used 4 months of bandwidth to download the whole thing; so worth it. I've watched a third of it so far. I love these controls. The knob's off an old incubator, and the tone-switch makes it so jangly. Someday, I'm going to make my own pick guard out of steel and send it to Danny to have it etched to look like a crazy 1920's time-machine control-panel

[excane]

moving-board2.JPG

You should leave them in the boxes when you reassemble and just put find Reeealllly long footswitches

[alexa.]

A pair of reverbs, pair of drives, pair of delays, volume, looper, and a fuzz. Two amps and a tuner.

I love this sooooo much

[Ancient Astronaught]

Changed the dirt section on my guitar board to just the Verellen Skyhammer Pre, it was a tight fit but with a lil spit n gumption i got it in there....





Anybody got any economical bass compressor recommendations? I love the compression effect of the CS-3 with the attack and release controls, but it removes all of the high end in my clean bass tone. Which is weird usually when i think tone loss i think low end loss, but not this time.

[warwick.hoy]

Eh; I've used cheap compressors and an expensive compressor. I've only been satisfied with expensive compressors (FEA Labs OptiFet).

Granted this was in Bass Land.

I'm loving your setup Double A!

[fetch]

[youtube]http://www.youtube.com/watch?v=VL4xRwl1f3A[/youtube]

[Ancient Astronaught]

Eh; I've used cheap compressors and an expensive compressor. I've only been satisfied with expensive compressors (FEA Labs OptiFet).

Granted this was in Bass Land.

I'm loving your setup Double A!

Yeah that's kinda what I was expecting to hear I've heard the FEA is good, and a few others that I'll probably end up checking out, like the engineers thumb / MXR comp deluxe? (the one with the 4 knobs and meter) / and the ashdown comp.

This is in bass land too! Board on the left (PB+, CS-3, BS, VPjr, DI / pre) is bass the board on the right is guitar, I switch off depending on the song.

Why thank you good sir!!!

[backwardsvoyager]

Re-arranged everything with a couple of new additions..

aaand now I have zero space left even though there's a few more things left to add

[MaxMaps]

Changed the dirt section on my guitar board to just the Verellen Skyhammer Pre, it was a tight fit but with a lil spit n gumption i got it in there....





Anybody got any economical bass compressor recommendations? I love the compression effect of the CS-3 with the attack and release controls, but it removes all of the high end in my clean bass tone. Which is weird usually when i think tone loss i think low end loss, but not this time.

about that pre-amp.

How do you run that into you guitar cab? Do you use a power block and then run that into the pre-amp or do you use a normal head? I am not understanding how two pre amps would work in a set up. (though I love to just turn knobs and say .. fuck it)

[sylnau]

moving-board2.JPG

You should leave them in the boxes when you reassemble and just put find Reeealllly long footswitches

Good idea.

[Ancient Astronaught]

about that pre-amp.

How do you run that into you guitar cab? Do you use a power block and then run that into the pre-amp or do you use a normal head? I am not understanding how two pre amps would work in a set up. (though I love to just turn knobs and say .. fuck it)

I run it in lo-output mode without the speaker emulator and run it straight into my head like I would any normal dirt box, just adjust the master volume to be unity w/o boost and louder w/ boost. It works great and sound amazing! You can run it into just a power amp and into a cab if you use the hi-output mode, and it has a dedicated recording out thats line level with a switchable speaker cab emulator. It's got all kinds of options that allow you to run it numerous ways, as a dirt box / preamp / or DI, super handy to have around.

[Grrface]

Man, there have been some crazy pretty boards in here lately.

voyager, you might have one of my favorite boards on this whole site.

[hollowhero]

Re-arranged everything with a couple of new additions..

aaand now I have zero space left even though there's a few more things left to add

10/10