DIRGE ELECTRONICS: Progress/Protos/Puppies

[skullservant]

Sorry things have been a little quiet here.

Got all the hardware mounted in Max's FY-2, as well as the bypass wiring and LED wiring. Just need to actually wire up his boards and find the circuit bends and it'll be good to go.

Everything for Behndy's bitcrusher is together and waiting, just have to add in a capacitor on the PCB and then wire it up when the enclosure comes in.

Got the hardware mounted on 4 SSStampedes last night. 2 of them are sold, 1 of them will be sold this week, and I believe the last will be up for grabs.

Apparently the germanium diodes that I use in the SSStampede aren't the easiest to find anymore, I ordered enough for this batch of 10 SSStampedes but I guess my next order will make more sense to buy those in bulk.

Going to be modding up a Dr Q big box for Scott Shriner of Weezer in the very close future to the specs that phantasmagorovich's is with the external pots to control the Q and the feedback loop!

Pictures soon of stuff as it progresses

[Derelict78]

^ wow dude movin on up in the world!

[skullservant]

He emailed me and I was like WUT

[nightterrors]

He emailed me and I was like WUT

That dude is so friggin' nice.

Had a few brief talks with him on IG about gear.

That's awesome though dude! congrats!

[intothegroove]

Sorry things have been a little quiet here.

Got all the hardware mounted in Max's FY-2, as well as the bypass wiring and LED wiring. Just need to actually wire up his boards and find the circuit bends and it'll be good to go.

Everything for Behndy's bitcrusher is together and waiting, just have to add in a capacitor on the PCB and then wire it up when the enclosure comes in.

Got the hardware mounted on 4 SSStampedes last night. 2 of them are sold, 1 of them will be sold this week, and I believe the last will be up for grabs.

Apparently the germanium diodes that I use in the SSStampede aren't the easiest to find anymore, I ordered enough for this batch of 10 SSStampedes but I guess my next order will make more sense to buy those in bulk.

Going to be modding up a Dr Q big box for Scott Shriner of Weezer in the very close future to the specs that phantasmagorovich's is with the external pots to control the Q and the feedback loop!

Pictures soon of stuff as it progresses

That's fucken awesome man! congrats!

[chutneyfarmer]

WEEREZ!!!

That's amazing dude. Glad to see your work getting out there hopefully it'll lead on to some more great things.

[skullservant]

Thanks dudes! I'm really stoked.

Today I get off work 4 hours early, so I'm going to use that time to build. Going to finish wiring up MaxMap's FY-2 and get some more SSStampedes built up!

[skullservant]

THE DIRGEDWELLER 2.0. CRAFTED FOR VICTORY. CRAFTED FOR CLOUDS. CRAFTED FOR THUNDARRRRR.

Mono input, dry output, and dual mono outputs. That means you can run into 3 amps with it. Why? Why NOT?
2 selectable delay times via a toggle switch- first goes from slap to 600ms, the second goes from 600-1200ms. Because who DOESN'T like lofi PT2399 delay?
Footswitch to go between two delay times in whatever mode you are in, essentially adds a 2nd knob to the delay mode set to the footswitch so you can go from a long delay to a short slap with just the footswitch.
Also has a 'rewind/sprong' momentary footswitch which slams the delay knob backwards and then brings it to the spot it was originally in, which leads for awesome oscillation and the THUNDARRR.
Has a Dwell momentary slam footswitch that creates infinite oscillation and feedback.
Footswitchable dual photo eye with knob to control sensitivity of the photo eyes, which attaches to the delay time so when you wave your foot over it you get WARBLES.
Lastly, expression control of the feedback!

A few people have asked how much it would cost to build... It takes about 8 hours to wire one of these up, and the enclosure itself is pretty pricey. But I could put one together for $335 + $10 shipping US / $25 shipping world cause of the size

[skullservant]

PS my soldering iron tip broke yesterday so a new one will be here Wednesday. Gonna finish up the FY-2 and Schnike's SSStampede

[warwick.hoy]

Consider this a Subscribed.....

You've been warned.

I'm a broke ass food service worker.

[backwardsvoyager]

It's... beautiful

[space6oy]

looks freaking awesome with all that doodling. and i'm a sucker for bare metal enclosures.

[zRobertez]

Too mounted jacks ftw

[intothegroove]

I just exploded in my pants

[skullservant]

Thanks guys