The Doom Room: ILF Edition

ilovedoom @ ilovefuzz
Post Reply
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: The Doom Room: ILF Edition

Post by Iommic Pope »

Cheers man. I get the benefits of porting, and I was most certainly going to dampen with some sort of foam/insulation, I was just trying to determine how relevant it might be for guitar purposes as bass requirements are generally more specific (in that there is no need for a guitar 4x12 to be any particular set of dimensions, it just worked out that way cause that's what jim marshall could make out of a sheet of ply at the time). I was also hoping to avoid having to calculate all the specifics of porting and cab size (there are ratios, not only for the porting but for the size of the box, speaker etc) as I'm generally shit with the math and at this hypothetical stage, trying to keep the project simple. Although it looks like that's where I might have to go with it, so if anyone knows the formulae behind designing bass cabinetry, lay it on me. I can do it if I sit down long enough with it. Just takes some time.
I was thinking of going w780mm (30.71") x h24" x d 16", so that width wise it matches my orange 2x12 (and my other 4x12) and I can stack them. The height and depth are then the same specs as the electric amps 1x15. For speakers at this stage I was thinking the warehouse 15", cause I'm pov, but also cause I have never heard a bad thing about them...yet. Open to other suggestions though. Will the extra width cause too much mud?
I like the sound of folded horns...I like the way you travel (in best Mike Dean voice).
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
User avatar
samzadgan
IAMILF
IAMILF
Posts: 2724
Joined: Thu Jan 17, 2013 5:10 pm
Location: amongst idiots...

Re: The Doom Room: ILF Edition

Post by samzadgan »

what do you guys think of the Gibson SG 60's tribute? I don't have an SG so that would be nice to add to my duo of LP and Flying V...and its also got P90's which i don't have on my other guitars either.
AxAxSxS wrote:...if its a loud tube amp.... :doom:
Iommic Pope wrote:Amps first, makeup sex later.
User avatar
CaptainBoxman
experienced
experienced
Posts: 749
Joined: Sun Jan 13, 2013 5:31 pm
Location: Plymouth, UK

Re: The Doom Room: ILF Edition

Post by CaptainBoxman »

I played one and it was good, especially for the cash.
Iommic Pope wrote: The Boxman hails the Mountain,
Zion's rays descend.
User avatar
samzadgan
IAMILF
IAMILF
Posts: 2724
Joined: Thu Jan 17, 2013 5:10 pm
Location: amongst idiots...

Re: The Doom Room: ILF Edition

Post by samzadgan »

CaptainBoxman wrote:I played one and it was good, especially for the cash.


cool.

i could basically get it if i sell my Zakk Wylde Epi...and still have a little cash left over for a good drop tune setup...its very very tempting, and it looks really nice too:
Image
AxAxSxS wrote:...if its a loud tube amp.... :doom:
Iommic Pope wrote:Amps first, makeup sex later.
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: The Doom Room: ILF Edition

Post by Iommic Pope »

Yeah I was gassing for a white one of these for a while. They seem ok for the money.
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
User avatar
Ancient Astronaught
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 7202
Joined: Tue Jul 12, 2011 9:14 pm
Location: Bear Country

Re: The Doom Room: ILF Edition

Post by Ancient Astronaught »

Iommic Pope wrote:Also, I know this goes back a few eons (pages) but that es2 is just about the coolest most star wars looking pedal I've ever seen. It's worth it just to pretend your hitting hyperspace.


I posted a bass demo over in the gear forum of it last night, and it will take you through hyperspace to dub space nine in a heart beat. :thumb:
Iommic Pope wrote: Skip, you rule. You hate people so much, you're willing to discredit all human progress, its awesome.
User avatar
Ancient Astronaught
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 7202
Joined: Tue Jul 12, 2011 9:14 pm
Location: Bear Country

Re: The Doom Room: ILF Edition

Post by Ancient Astronaught »

Iommic Pope wrote:Cheers man. I get the benefits of porting, and I was most certainly going to dampen with some sort of foam/insulation, I was just trying to determine how relevant it might be for guitar purposes as bass requirements are generally more specific (in that there is no need for a guitar 4x12 to be any particular set of dimensions, it just worked out that way cause that's what jim marshall could make out of a sheet of ply at the time). I was also hoping to avoid having to calculate all the specifics of porting and cab size (there are ratios, not only for the porting but for the size of the box, speaker etc) as I'm generally shit with the math and at this hypothetical stage, trying to keep the project simple. Although it looks like that's where I might have to go with it, so if anyone knows the formulae behind designing bass cabinetry, lay it on me. I can do it if I sit down long enough with it. Just takes some time.
I was thinking of going w780mm (30.71") x h24" x d 16", so that width wise it matches my orange 2x12 (and my other 4x12) and I can stack them. The height and depth are then the same specs as the electric amps 1x15. For speakers at this stage I was thinking the warehouse 15", cause I'm pov, but also cause I have never heard a bad thing about them...yet. Open to other suggestions though. Will the extra width cause too much mud?
I like the sound of folded horns...I like the way you travel (in best Mike Dean voice).


Cabinet design software -> http://www.linearteam.dk/default.aspx?pageid=isdonline

As far as speakers, I love my WGS ET65's. Amazingly well built and sound speakers for the money. I have the equivalent Weber's and they are almost twice the price but only marginally better IMO. As far as 15's though right now I have weber michigans and Eminence Delta 12LFA's, the michigans are guitar only speakers but they sound amazing at it, they fit right in behind the midrange of a good 12" and fill out the rest of the spectrum. The eminence are bass hounds, they will fill out your low end and have a really tight response, but don't produce a full range sound like the michigans, so you either love em or hate em.
Iommic Pope wrote: Skip, you rule. You hate people so much, you're willing to discredit all human progress, its awesome.
User avatar
ridingeternity
committed
committed
Posts: 335
Joined: Tue Mar 19, 2013 11:50 am
Location: SLO
Contact:

Re: The Doom Room: ILF Edition

Post by ridingeternity »

Ancient Astronaught wrote:As far as speakers, I love my WGS ET65's. Amazingly well built and sound speakers for the money. I have the equivalent Weber's and they are almost twice the price but only marginally better IMO. As far as 15's though right now I have weber michigans and Eminence Delta 12LFA's, the michigans are guitar only speakers but they sound amazing at it, they fit right in behind the midrange of a good 12" and fill out the rest of the spectrum. The eminence are bass hounds, they will fill out your low end and have a really tight response, but don't produce a full range sound like the michigans, so you either love em or hate em.


I love the eminence Delta series speakers, but I do agree, great response and low end, and a very unique representation of the low end at that...they definitely need some conventional speakers to balance the low end. Ive been using a 4x12 of Delta Pro 12a for awhile now, and although it sounds great, I have come to the conclusion that those speakers would sound even better crossed with something like V-30s or Classic Leads or their higher watt Warehouse cousins the Liberator and British leads...been on my mind for some time...been toying with the idea of a 6x12 with 2xDelta Pro 12a in the bottom two, then the top 4 and X pattern of the Liberator and British leads and run that with a 4x12 of 2xDelta Pro and 2xLiberator in an X pattern. This way they will both get a pretty full range tone, but if the venue has limited stage space or for some reason I can only use one cab for the night I can just fire up the 6x12 and still get the same overrall tone with the 4x12.
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: The Doom Room: ILF Edition

Post by skullservant »

Delta 12a and a 12LFC. Best combo ever
User avatar
new05002
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 3870
Joined: Thu Aug 04, 2011 1:07 pm

Re: The Doom Room: ILF Edition

Post by new05002 »

Guitar Orientated 15s:

Weber: Michigan, Thames, California, Texas, Chicago

Eminence: Big Ben, Legend 1518, Commonwealth.
User avatar
D-Day
experienced
experienced
Posts: 609
Joined: Fri Jan 18, 2013 1:25 pm
Location: SEATTLE ROCK CITY
Contact:

Re: The Doom Room: ILF Edition

Post by D-Day »

Eminence Legend in every hole! That's PRO!
Iommic Pope wrote:Social currency is for cunts.
Infinite Flux
Electric Heat
User avatar
new05002
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 3870
Joined: Thu Aug 04, 2011 1:07 pm

Re: The Doom Room: ILF Edition

Post by new05002 »

im still contemplating which 15 i would like. Im going to leave the Deltas off the board for now.

Big Bens: 225W, $111 per

Legend 1518: 150W, $80 per

Michigans: 100W, $122 per

prices before shipping
User avatar
ridingeternity
committed
committed
Posts: 335
Joined: Tue Mar 19, 2013 11:50 am
Location: SLO
Contact:

Re: The Doom Room: ILF Edition

Post by ridingeternity »

skullservant wrote:Delta 12a and a 12LFC. Best combo ever


Noted!
User avatar
ridingeternity
committed
committed
Posts: 335
Joined: Tue Mar 19, 2013 11:50 am
Location: SLO
Contact:

Re: The Doom Room: ILF Edition

Post by ridingeternity »

Hmm just looked into them, kinda want to balance the 4.5k high range cutoff on the Pro 12a's with at least a couple of drivers that reach around 6k-8k, recently found awesome drivers that span 45 - 7k:

http://www.proaudiostash.com/product/fa ... 5328.shtml

$200 each though? Eff that...but yeah trying to create a similar range through speaker mixing.
Droneforbreakfast
committed
committed
Posts: 302
Joined: Fri Feb 08, 2013 11:59 am

Re: The Doom Room: ILF Edition

Post by Droneforbreakfast »

Michigans seem great, i'd love to get two for my Fender 2x15.
Post Reply