Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!
1. Take two identical random silicon transistors (for more mojo: your fav fuzz silicons) 2. Tie the BASES together, 3. Cut off one COLLECTOR 4. connect a 3k to 6k resistor between the EMITTER of the collectorless device and the EMITTER of the other transistor.
Does anyone have picture of how the resistor is connected between the two emitters of the transistors? Has anyone tried using a 10k pot between the two emitters and have pics of that, and how either method is then connected to the rest of the circuit?
in my opinion its pointless since high gain germanium is so hard to find. taking a germanium transistor Hfe 100 and dropping Hfe down to 50 does not have too many applications except maybe a range master.
Just wondered cos I've got a load of ac125s that are all over 200, some over 300. All test good for leakage on a DCA55. Was thinking of piggybacking them in a Supafuzz.
Is there a circuit that likes stupid hi gain germaniums?
sell them to me! I will find a use for them. maybe a pnp muff? please don't waste them by dropping the gain down to 100 Hfe. I have recently noticed that the world is running short on good germanium transistors. the next generation of pedal builders might not have access to germaniums much at all.
A germanium muff sounds interesting but aren't the diodes doing most of the clipping in one of those? I like the effervescent high end on a muff but have always attributed it to the silicon inside. If it seems wrong though, even more reason to do it!
Ben79 wrote:A germanium muff sounds interesting but aren't the diodes doing most of the clipping in one of those? I like the effervescent high end on a muff but have always attributed it to the silicon inside. If it seems wrong though, even more reason to do it!
high gains are part of the sound. you could use all germanium diodes for even more mojo. I really want to make a pnp muff with at least one MP16B in it. the gains on my MP16B are Hfe 100 max so I dont want to use 4 of them. they do however have a really bass heavy response so a MP16B in Q2 would be really cool mixed with other high gain PNP germaniums.
Yeah, I expected behndy to be all up in here like nobody's business.