The Doom Room: ILF Edition

[new05002]

Bridge, Neck, CT Bridge, CT Neck, Series the CT Bridge and Neck In Phase, Mega Bucker, and....

have not figured out last position

how i am going to wire it is a bit tricky. In the modes where there only needs to be 1 volume and tone control I have to do some thinking

[dubkitty]

Started a new 3 piece Doom/Drone group 2 baritone guitars + Bass. Need name ideas guiz!

Tsunami Girls.

[Ancient Astronaught]

Bridge, Neck, CT Bridge, CT Neck, Series the CT Bridge and Neck In Phase, Mega Bucker, and....

have not figured out last position

how i am going to wire it is a bit tricky. In the modes where there only needs to be 1 volume and tone control I have to do some thinking

Last position? You got 6 listed there.

You should just do a master Vol + Tone for the whole thing, or maybe a 3 way toggle and 3 knobs -> 1> Master vol 500k + tone 500k (for stock style tones) 2>separate master volume only 1meg (for brighter more cutting tones) 3> straight to the output jack (can't get more metal than this!!!)

[new05002]

Bridge, Neck, CT Bridge, CT Neck, Series the CT Bridge and Neck In Phase, Mega Bucker, and....

have not figured out last position

how i am going to wire it is a bit tricky. In the modes where there only needs to be 1 volume and tone control I have to do some thinking

Last position? You got 6 listed there.

You should just do a master Vol + Tone for the whole thing, or maybe a 3 way toggle and 3 knobs -> 1> Master vol 500k + tone 500k (for stock style tones) 2>separate master volume only 1meg (for brighter more cutting tones) 3> straight to the output jack (can't get more metal than this!!!)

Well I have an LP, Dont wanna make the controls useless and or remove them for aesthetic reasons.

[dubkitty]

nice amp...friend of mine got the 30w combo after i kept nagging him to get it...turned out to be the best purchase...those laneys sound amazing...and nice guitar too, did you strip the paint down you self? or is that stock?

my main amp is a Laney VC30 2x12. it kills...i've played at get-togethers where people were paying through $2500 boutique amps and my girl sounded better than them all. except maybe for the guy who used a blackface Bassman head into a Voice of the Theatre PA cab.

[Ancient Astronaught]

Well I have an LP, Dont wanna make the controls useless and or remove them for aesthetic reasons.

There would be no open holes, you have 4 control pots now, if you wire it like I said you can fill them with a 3way toggle and 3 control pots so the only aesthetic change would be a toggle instead of one of the control pots.

[new05002]

Well I have an LP, Dont wanna make the controls useless and or remove them for aesthetic reasons.

There would be no open holes, you have 4 control pots now, if you wire it like I said you can fill them with a 3way toggle and 3 control pots so the only aesthetic change would be a toggle instead of one of the control pots.

oh I forgot to mention that I will replace the usual toggle with the rotary.

[Ancient Astronaught]

oh I forgot to mention that I will replace the usual toggle with the rotary.

I figured as such! It's gonna be a tight fit though those cavities are not very large.

[new05002]

oh I forgot to mention that I will replace the usual toggle with the rotary.

I figured as such! It's gonna be a tight fit though those cavities are not very large.

yea something I have to actually explore. Need to do a written scheme to see what is possible and what it not possible.

[new05002]

looks like its no problem to do 4 positions for Bridge, Neck, CT Bridge, CT Neck but no easy way to do series the coil taps or megabucker. I really do not want to use alpha push pull pots so I will avoid them and lose options if I need 2

[Ancient Astronaught]

looks like its no problem to do 4 positions for Bridge, Neck, CT Bridge, CT Neck but no easy way to do series the coil taps or megabucker. I really do not want to use alpha push pull pots so I will avoid them and lose options if I need 2

There's no way to do neck + bridge together? You can't parallel off the leads where they connect to the rotary switch?

[new05002]

There are only 4 pos 3 pole and 6 pos 2 pole switches that can easily be bought so with just 2 poles there is not way to do it.

[Ancient Astronaught]

There are only 4 pos 3 pole and 6 pos 2 pole switches that can easily be bought so with just 2 poles there is not way to do it.

Well that sucks, I was thinkig if you took jumpers off the + where the pickups wire up and soldered both to the + of the 5th position you'd get a parallel megabucker.

[new05002]

Id prefer to do series the 2 coil taps. That would be akin to series 2 SC pups on a Tele which has a really nice clean sound.

it would be a lot easier if I only had 1 vol and 1 tone.

[Ancient Astronaught]

Id prefer to do series the 2 coil taps. That would be akin to series 2 SC pups on a Tele which has a really nice clean sound.

it would be a lot easier if I only had 1 vol and 1 tone.

Gotcha, I'm sure it will turn out kick ass either way!!!!