Doc Sci Frazz Dazzler on bass demo vid

[behndy]

OOF. i like this thing a LOT. so much anger, but notes still come through all useful and audible like. verrrrrrrrry sechhsssssssssssy.

[youtube]http://www.youtube.com/watch?v=u7Ngqe_Bv8Q[/youtube]

[sylnau]

OOF. i like this demo vidja a LOT. so much anger, but notes still come through all useful and audible like. verrrrrrrrry sechhsssssssssssy.
The way you're using the Expressionator is so cool.

[Waterpilot]

Great vid Behndy! Man that sounds good. I wasn't sure how it was going to hold up low end wise but it sounds like it's in there! I'm pretty sure I need an expression pedal now.

[yallerhon]

Oh man that sounds rad! I had never seen an Expressionator pedal before. I like that randomy-ramp mode at the start; I can think of several songs I'd use it in.

Off to look at vids of it now.

*edit* and they are all behndy vids!

[behndy]

thanks ch'all! yah, i liiiiiiiike this pedal. and yahpers. the Expressionator ROKKS. so much more than a utility pedal.

iiiiiiiiiiii....... am having a blast with the Elements right now. OOF.

[yallerhon]

So where can one get this Expressionator?

My Frazz hungers for it.

[behndy]

they took my Squeezing Arm Julia. WHY my Squeezing Arm??!?

..... Jean Baudin's (ElevenStrings here on ILF) who you want to talk to. Jean@JeanBaudin.com

BOOM.

[Ryan]

Really cool video, Ben, thank you! I'm loving that Expressionator too, gotta get one.. really fun addition to a pedal board!

[behndy]

yah! the Expresso is SO cool. using one exp pedal for multiple pedz is a godsend, all the taper and throw options make it into way more than a utility pedal. love that thing. it's changed how i use a LOT of pedals.

diiiiiiigin the Frazzy!

*shuffles feet all nervous like*

you um. um. you build GOOD pedals. would you.... want to have dinner some ttime?

[Gutmann]

Guys, one question. The expressionator doesn't work with my Frazz äs it should. It does control the Mix nur there is no dry signal so it mutes completely in the heel position.

It works completely fine with the Mission EP1 alone but with the expressionator, drysignal dissappears..

Any idea?

[behndy]

have you tried the Expressionator with any other pedals? you should make sure it's working/setup right first, then see if it's having a problem with just the Frazz specifically.

a couple options - the Expressionator has a range setting. make sure that's set to full, then try both of the first two throw options. i think mine worked with all of them. then make sure that channel on the Expressionator that the Frazz is plugged into is selected to be on (led will be lit).

is it working at ALL with the Expressionator? like, working but working weird? or the Expressionator plugged up the expression pedal does nothing?

[Ryan]

Other points to ponder... the Expressionator can output a voltage or a resistance set by an internal switch, the Frazz will only work right with a resistance. Also make sure you're using a TRS cable, it won't work right with a normal mono TS cable.

[Gutmann]

have you tried the Expressionator with any other pedals? you should make sure it's working/setup right first, then see if it's having a problem with just the Frazz specifically.

a couple options - the Expressionator has a range setting. make sure that's set to full, then try both of the first two throw options. i think mine worked with all of them. then make sure that channel on the Expressionator that the Frazz is plugged into is selected to be on (led will be lit).

is it working at ALL with the Expressionator? like, working but working weird? or the Expressionator plugged up the expression pedal does nothing?

The Expressionater controls my BitQuest, the Goatkeeper and my Superdelay without any problems, only the Frazz has issues. It reacts to the expressionator according to the selected option. But the cleansignal dissappears when I roll back the mix ( it works perfectly when I plug in the expression pedal directly).

The range should be normal but i will try to do a reset of the expressionator tomorrow.

I tried different channels, no change here.

Other points to ponder... the Expressionator can output a voltage or a resistance set by an internal switch, the Frazz will only work right with a resistance. Also make sure you're using a TRS cable, it won't work right with a normal mono TS cable.

I haven't touchier the internal switches yet, they are all set to resistance. Would it harm the Frazz if i tried output voltage (this would be the only thing I could change...)

Yes, cables are trs, the other pedals need trs too. I even tried another cable, no change here.


Ryan, behndy, thank you both a Lot for your help

[behndy]

of course. i'll let Jean know you're having a problem, since it's sold by Mission now i dunno how involved he is, but he might have some thoughts.

[Gutmann]

Did you get any information from Jean, behndy?