Let's see your PEDAL BOARD!

[phantasmagorovich]

Both pics work for me. I wonder what the hell this is. Any info at all?

[mff]

Well.... I found the product info but haven't read it yet. The one i got is a little different than the pic. It seems to have 2x2 delay units hooked together, and one modulation unit. Apparently i can route the delays into eachother, and stereo out. It also only does XLR. Hopefully I'll have some fun with it next week, and hopefully it will get awesome.

But save to say: digital delay. Though not very gig-friendly

[Bassus Sanguinis]

Well.... I found the product info but haven't read it yet. The one i got is a little different than the pic. It seems to have 2x2 delay units hooked together, and one modulation unit. Apparently i can route the delays into eachother, and stereo out. It also only does XLR. Hopefully I'll have some fun with it next week, and hopefully it will get awesome.

But save to say: digital delay. Though not very gig-friendly

well, it doesn't weight more than half of a guitar amp, right? So I can't see why it wouldn't deliver the awesome live, too.

[Interstellar Burst]

Been lurking here for the past year while I put this together - so thank you all for your collective wisdom:

Crybaby Classic>Fuzz Factory>Poly Tune Mini>GR2 (In GR2 loop in buffered bypass mode: Ring Thing>Geiger Counter Civilian Issue)> Diamond Compressor>Bit Commander>SHOD>Pharoah>Timmy>Mini Buffer>Blackstar HT-5C (In amp effects loop: Volume Jr.>Decimator>FL-9>Semaphore Tap Tremolo>Timeline>Hall of Fame>Programmable EQ>RC-3)

[adrianlee]

^toanz.

How's that diamond compressor? Always wanted to try that.

[excane]

Been lurking here for the past year while I put this together - so thank you all for your collective wisdom:

Crybaby Classic>Poly Tune Mini>GR2 (In GR2 loop in buffered bypass mode: Ring Thing>Geiger Counter Civilian Issue)> Diamond Compressor>Bit Commander>SHOD>Pharoah>Timmy>Mini Buffer>Blackstar HT-5C (In amp effects loop: Volume Jr.>Decimator>FL-9>Semaphore Tap Tremolo>Timeline>Hall of Fame>Programmable EQ>RC-3)

Did you forget the zvex in your description of the signal chain?

[Interstellar Burst]

Aye - falling at the first hurdle! now fixed

[excane]

Aye - falling at the first hurdle! now fixed

Never heard of the fuzz factort

Is that a mix between a fuzz and fart?

[Interstellar Burst]

Aye - falling at the first hurdle! now fixed

Never heard of the fuzz factort

Is that a mix between a fuzz and fart?

..and the second hurdle

[excane]

Aye - falling at the first hurdle! now fixed

Never heard of the fuzz factort

Is that a mix between a fuzz and fart?

..and the second hurdle

bwhahah, I'm just bustin yer balls man

Nice board!!

[excane]

The GR-2 with the Geiger in it must sound ridiculously good. I gotta go try that out....

[Interstellar Burst]

^toanz.

How's that diamond compressor? Always wanted to try that.

I used to have a dyna-comp and compared to that its less noisy and colours the tone less. The eq does pleasant things and if you want to really turn up the comp (usually I only keep it really subtle at 9 0'clock) there is just a generally lovely vibe.

[excane]

Been lurking here for the past year while I put this together - so thank you all for your collective wisdom:

Question for ya - I'm really interested in the Source EQ for a utility device.

You hold the footswitch until you get to the preset you want, then let go? How do you activate the scroll function? Or does that require you to bend down and press buttons?

[Interstellar Burst]

The GR-2 with the Geiger in it must sound ridiculously good. I gotta go try that out....

There are so many possibilities with it and the buffered bypass option on the gr2 means that you can run the gc as normal when the gr2 is off.

Probaly my favourite thing is to use them both together with the mix down a bit on the dirty channel of the amp

[Interstellar Burst]

Been lurking here for the past year while I put this together - so thank you all for your collective wisdom:

Question for ya - I'm really interested in the Source EQ for a utility device.

You hold the footswitch until you get to the preset you want, then let go? How do you activate the scroll function? Or does that require you to bend down and press buttons?

Recent acquisition this so I'm still getting the hang of it - it works like you describe and you can adjust the time taken to scroll through the 4 presets as you hold down the switch. You can also set it so that it just keeps scrolling when you click the switch once for a tremolo like effect (haven't tried that yet). So far I'm just happy to have a couple of boosts and a couple of scoop options in one pedal - may have to get more creative soon though