Show off your Mammoth Pedal!

[Schlatte]

Special custom edition of the MOM-D "Fuzzler" fuzz. My first pedal with relay based true bypass.
Mammoth parts used:
'Black Texture' Powder Coated 4S125B Enclosure
2x 15mm x 13mm brushed aluminum knurled knobs
5mm green led
led bezel

Pics:




Some sweet toanz

[Jero]

Enclosure (Vintage Orange Sparkle)
All hardware (switch, jacks, pot)

[warwick.hoy]

I posted this on you FB,...but I built my Beavis Board using all parts sourced from Mammoth excluding the breadboards and terminal strips and the Cocobolo board itself.

[Bret608]

Hi Blake,

I figured I defintely needed to post pics of this as you answered numerous questions about your LED bezels, 3PDT board wiring, etc! This is a Madbean Pepper Spray and is my first pedal build ever. All the hardware, including enclosure, jacks, switches, and knobs are from Mammoth, and even a cap or two if I remember correctly.

Thanks again!

Gut shot

100_4633.JPG (49.53 KiB) Viewed 4802 times

Outside of pedal

100_4631.JPG (36.98 KiB) Viewed 4802 times

[Comfort Player]

Mammoth Enclosures RULE!!!

[skullservant]

Hows it going all? I've been using Mammoth for about 4 months now. They're my only supplier now, can't beat them! Here are some builds of mine with Mammoth parts:

SHO:


Wooly Mammoth:


SHO:


Dr Boogie:


Wooly Mammoth:


Thanks Blake!

[skullservant]

Just finished this up the other day for fellow ILFer BlindToFaith:

BlindToFaith BlueGreen Muff
Tone-bypass, mids knob, flat mids switch, and presence toggle.

Everything but the board, toggles, and knobs from Mammoth!

[jfrey]

Tried tagging Mammoth on Facebook, but I don't think it worked - didn't show up on your page.

Anyway, built a Bazz Fuss tonight with all Mammoth parts. (By the way, awesome delivery time - I ordered the parts only like 2 days ago)

[The4455]

Mammoth everything except the solder, led, and resistors.

[Twisted]

My first pedal using all Mammoth parts (except the pots, which I had laying around and the LED bezel). Its a modded DOD overdrive 250 clone. I will be replacing its silicone diodes with germanium, and changing to an asynch distortion (1 diode one side, 2 diodes the other). The tone is currently a little too gritty for my tastes, and that should soften it up a little.

[raster]

I know this is "show off your pedal" but I'm going to drop this in here anyway... I needed a really nice metal enclosure for a project, and the Mammoth "tall" enclosure works perfectly!

I ended up making a bunch of these to sell to people who use the Sparkbooth software for their photo booths. Here's my first post on building the button: http://rasterweb.net/raster/2011/05/09/the-button/

[warriorpoet]

A few GuitarPCB builds:

Pump'd Up Tone Bender (with external bias knob)



Hot Chilicon



MKC1 (with adjustable boost and switchable clipping)




ODC1 (with bass boost mod)



Luna Fuzz



As you can see, I'm a hack, but love building nonetheless

[greyscales]

Three builds using Mammoth enclosures, knobs, and miscellaneous hardware. The first is a fuzz, second is delay, third is a Big Muff variant.

[whalesong]

Tremolo and Tube Screamer with knobs enclosures jacks etc. from MaMMotH! Thanks for being the BEST!

[televisiondown]

This is the GGG WHRL. I used the Tiger Red Sparkle 125B. It's not really red, more orange-y. Got the waterslide decals from Mammoth, too. Love the knobs!

redllamafront.jpg (152.31 KiB) Viewed 4347 times