Parts Swap: Find what you need

Jero · Post by **Jero** » Thu Nov 03, 2011 1:54 pm

McSpunckle wrote:
Jero wrote: heatshrink smaller than 1/4in.

How much smaller? I have some really small stuff. It's under 1/8"... I think just bigger than 1/16". Perfect for splicing wires and going over component leads.

=/< 1/8th

Officer Bukowski · Post by **Officer Bukowski** » Fri Nov 04, 2011 1:42 am

Thanks Mc Spunckle and Jero :hug:

Ilikewater · Post by **Ilikewater** » Fri Nov 04, 2011 3:37 am

Looking for some Teisco parts if anyone has the scoop.

LaoWiz · Post by **LaoWiz** » Sun Nov 06, 2011 12:31 am

Jero,

sorry No 430 pfs

Jero · Post by **Jero** » Sun Nov 06, 2011 4:14 am

It's cool, thanks for looking.

I've got a list coming together already for more I need, so I'll just have to place another order soon.

01010111 · Post by **01010111** » Mon Nov 14, 2011 8:35 pm

Needed: two 3p3t switches. In the first position needs to connect the first row to the second, in the second position the first to the third, and in the third position the first to the fourth. I ordered some 3p3t switches, but they didn't connect the poles the way I thought they would. They connected the first row to the second in the first position, the second to the third in the second position, and the third to the fourth in the third position. If these switches were under $30 I would be very happy.

Have: cash

fuzzmax · Post by **fuzzmax** » Mon Nov 14, 2011 8:39 pm

Hi all! I need a 1MA pot, one 4.99K and one 51K resistors for a build.(a madbean's sabretooth fyi) I got parts to swap.
thanx!

McSpunckle · Post by **McSpunckle** » Mon Nov 14, 2011 8:55 pm

wfs1234 wrote:Needed: two 3p3t switches. In the first position needs to connect the first row to the second, in the second position the first to the third, and in the third position the first to the fourth. I ordered some 3p3t switches, but they didn't connect the poles the way I thought they would. They connected the first row to the second in the first position, the second to the third in the second position, and the third to the fourth in the third position. If these switches were under $30 I would be very happy.

Have: cash

You're talkin' slide switches here, right?

01010111 · Post by **01010111** » Mon Nov 14, 2011 9:00 pm

I'd pretty much take any kind of switch that would do this. But yeah, the switches I got were slide switches and they did not do what I thought they would.

multi_s · Post by **multi_s** » Mon Nov 14, 2011 9:49 pm

wfs1234 wrote:Needed: two 3p3t switches. In the first position needs to connect the first row to the second, in the second position the first to the third, and in the third position the first to the fourth. I ordered some 3p3t switches, but they didn't connect the poles the way I thought they would. They connected the first row to the second in the first position, the second to the third in the second position, and the third to the fourth in the third position. If these switches were under $30 I would be very happy.

Have: cash

you can do this with 4p3t no? there are many rotary switches that can handle it and cost about 2 bucks.

http://www.ebay.ca/itm/2-Channel-Band-R ... 519a11baaf

etc

in the first position it connects up to 4 poles to the first set of throws, second the poles to the second throws, third the poles to the third throws.

If you only need three poles then you can still use 4p3t.

multi_s · Post by **multi_s** » Mon Nov 14, 2011 9:50 pm

sorry double posted somehow

ARC Effects · Post by **ARC Effects** » Sun Nov 27, 2011 4:38 pm

Not sure where I should post this but...

PARTS LOT FOR SALE

Quite a few people can attest to the quality of these parts.

This will be the LAST of my bare 1590B's (which I won't be buying again because you see how many i never ended up using :lol:

)

Lot includes :

(1) PPP 1590DD Powdercoated in Teal
(5) Unfinished 1590B Enclosures
(5) 3PDT Switches
(5) Neutrik Mono Jacks
(5) Neutrik Stereo Jacks
(1) Populated NPN Fuzz Face on vero using mojo style components (axial), onboard bias trim, and transistor sockets
(1) ORIGINAL MXR Envelope Filter PCB (real deal from the factory,unpopulated)
(5) DPDT ON-ON Toggle Switches
(5) "Boss On Steroids" Knobs
(5) DC Jacks
(5) Quality Battery Snaps
(5) 5MM LED Bezels
(5) 5MM LED's (your choice of either White, Red, or Blue)

$99 Shipped USPS Priority/PPG East Coast , $105 Shipped USPS Priority/PPG West Coast (due to the size of the DD)

Pictures available of everything if need be but I assure you it's top quality stuff.

Jero · Post by **Jero** » Mon Nov 28, 2011 5:38 am

Looking for one or two 2n3819's.
Have a most stuff.

edit: NVRM, just got a bunch of these

Kellanium · Post by **Kellanium** » Thu Jan 19, 2012 4:06 pm

Bumping. The power Jack i received with my BYOC FA-1 is defective. I need a new one. Anyone got one with an external nut?

Jero · Post by **Jero** » Thu Jan 19, 2012 4:23 pm

Kellanium wrote:Bumping. The power Jack i received with my BYOC FA-1 is defective. I need a new one. Anyone got one with an external nut?

Yeap!

I'm looking for (2) 24mm 500k pots for my telecaster. Forgot to add them to my order the other night.

ilovefuzz.com

Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need

Re: Parts Swap: Find what you need