Pedal power! (what supply do you use)

sevenSHARPnine · Post by **sevenSHARPnine** » Tue Sep 27, 2011 2:52 am

Mudfuzz wrote:PP2 on main board, onespot for when I don't take a board or use my small one.

Samesies except I use a BBE Supa Charger instead of a PP2.

Holy Schnikes · Post by **Holy Schnikes** » Tue Sep 27, 2011 2:59 am

Fuzz_Pi wrote:I use a pedal power iso5. Which i loved up until one of the 9v outputs
mysteriously went bad one day.

Does Voodoo Labs have a warrenty?

Voodoo Labs has top notch customer service. Call those guys, they'll take care of most any issue that arises.

J-Fuzz · Post by **J-Fuzz** » Tue Sep 27, 2011 3:10 am

I've been using the BBE charger for the past 3 years. It was great until recently. Shit out on me a few times in the past couple of months during critical moments. I'm going with the Voodoo Labs charger soon.

univalve · Post by **univalve** » Tue Sep 27, 2011 3:56 am

mxr mc-403
ollmann stuff (cheap and good for eu breaux)

Hacken · Post by **Hacken** » Tue Sep 27, 2011 8:05 am

I use One Spot, but since i got my self a germ-fuzz i would need another one since its positive ground.
Could i use a T-rex Fuel Tank JR for both positive and negative ground pedals?

Ilikewater · Post by **Ilikewater** » Tue Sep 27, 2011 10:17 am

I think I'm powering 10 pedals on a 1spot at the moment.

grindonomicon · Post by **grindonomicon** » Tue Sep 27, 2011 10:40 am

If you have isolated power output, like the PP+ or the Artec, will the grounding of the pedal matter? Won't it be just like plugging it into a single boss adapter?

That Artec is giving me the sexy eyeballs with it's low low price. Then I might be able to swing a Joyo Ultimate Ocatve fuzz too. :drool:

Psyre · Post by **Psyre** » Tue Sep 27, 2011 11:04 am

I am using a onespot atm, but I'm gas'ing over the Tesla!

Gunner Recall · Post by **Gunner Recall** » Tue Sep 27, 2011 11:07 am

The arctec is the same as the dunlop brick, not isolated.

Negative/positive ground just means you can't mix and match off the same output/daisy chain.
Something with isolated outs like the fuel tank jr would work fine.

I'm tellin you dudes...don't skimp on your power supplies. I used to be the same way..."why spend $$$ on power when you can buy more fuzz?"
...then shit started breaking, a few nice pedals fried...I'm totally OCD about clean/isolated power now.

Holy Schnikes · Post by **Holy Schnikes** » Tue Sep 27, 2011 11:10 am

Gunner Recall wrote:I'm tellin you dudes...don't skimp on your power supplies. I used to be the same way..."why spend $$$ on power when you can buy more fuzz?"
...then shit started breaking, a few nice pedals fried...I'm totally OCD about clean/isolated power now.

This was my experience with a OneSpot. Eventually, something gets fucked up from those high current daisy chains. Hopefully something inexpensive and easily replaceable.

Jero · Post by **Jero** » Tue Sep 27, 2011 1:44 pm

These claims of pedals getting fucked up on onespots...how many boxes were in the chain? Were you using it with just one?

sevenSHARPnine · Post by **sevenSHARPnine** » Tue Sep 27, 2011 1:44 pm

I can actually daisy-chain up to 5 pedals using a hamster running on a wheel as my source of power.

Holy Schnikes · Post by **Holy Schnikes** » Tue Sep 27, 2011 2:06 pm

Jero wrote:These claims of pedals getting fucked up on onespots...how many boxes were in the chain? Were you using it with just one?

I was powering 5. The OneSpot actually fried somehow, taking the first two fuzz pedals in line with it. Everything analog and low current draw, not sure what went wrong with it. That's the last time I used a OneSpot or any daisy chain equivalent.

I know several people who use 'em though, trouble and noise free.

Zounds Perspex · Post by **Zounds Perspex** » Tue Sep 27, 2011 2:12 pm

PP2+, Iso-5, Fuel Tank Jr., and a Sanyo Eneloop. All great for different uses.

grindonomicon · Post by **grindonomicon** » Tue Sep 27, 2011 5:23 pm

Gunner Recall wrote:The arctec is the same as the dunlop brick, not isolated.

Both of the Artec power supplies are listed as individually isolated power supply. It's the 'Joyo Power Supply' that's a copy of the dunlop brick. Or is the description wrong?

ilovefuzz.com

Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)

Re: Pedal power! (what supply do you use)