Any help for an ILF'er?

General Gear Discussion - effects, synths, etc.

Moderator: Ghost Hip

Post Reply
User avatar
wsas3
IAMILF
IAMILF
Posts: 2406
Joined: Wed Feb 02, 2011 8:24 pm
Location: NYC

Any help for an ILF'er?

Post by wsas3 »

I got a oc-2 off of ebay and finally got home, excited to play. I plug it in and it doesn't work. I'm using a one-spot currently :facepalm: and the output jack seems to have been replaced with a standard washer. Any tips before I talk to the guy?
Chankgeez wrote:True, but you can also use the Klon as a tremolo. Just stomp on the switch as fast or slow as you'd like.
Good dealings with: benjuro, hatshirt(2), Eric!, insubordination, theavondon, skullservant, Ilikewater, GardenoftheDead, AndyTran, behndy, JerryTRCD, StopReferencing, philibis, jfrey, bob the robot, Noise..., space60y(x2), jskadiang, Ryan(2), Helter, mordecainyc, many more
User avatar
dubkitty
Supporter
Supporter
Posts: 14799
Joined: Wed Nov 10, 2010 2:03 pm
Location: somewhere between Never-Never Land and Wonderland, in a place called Never Wonder Land

Re: Any help for an ILF'er?

Post by dubkitty »

open it up and make sure there isn't a dead battery in there?
try it with a battery?
try different cords?
try it by itself if you're putting it in the signal chain?
if it's in the signal chain, is something else turned down so the signal isn't getting through? this happens to me regularly and drives me batshit.
make sure all the knobs are up? maybe one of them was taken off and replaced so it's pointing wrong?
In girum imus nocte et consumimur igni

FIFTY YEARS OF SCARING THE CHILDREN 1970-2020--and i'm not done yet

DUBZ LOOPZ 2: THE NEXT GENERATION OUT NOW: https://on.soundcloud.com/9HKgc5xbaaYz6FNL7

DUBZ ÄLTER LOOPZ (2012-14): https://soundcloud.com/dubkitteh-1/sets ... ks-2012-14
User avatar
devnulljp
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 3989
Joined: Fri Oct 09, 2009 11:29 pm

Re: Any help for an ILF'er?

Post by devnulljp »

Does it work with a battery?
Good deals done with all these guys
Canada, we put the "u" in satire
User avatar
wsas3
IAMILF
IAMILF
Posts: 2406
Joined: Wed Feb 02, 2011 8:24 pm
Location: NYC

Re: Any help for an ILF'er?

Post by wsas3 »

Don't have batteries, thats the only reason I'm not sure it doesnt work. But i put it as the only thing in the chain, doesnt work. No battery in there, doesnt work. Different cords, doesnt work and so on so forth
Chankgeez wrote:True, but you can also use the Klon as a tremolo. Just stomp on the switch as fast or slow as you'd like.
Good dealings with: benjuro, hatshirt(2), Eric!, insubordination, theavondon, skullservant, Ilikewater, GardenoftheDead, AndyTran, behndy, JerryTRCD, StopReferencing, philibis, jfrey, bob the robot, Noise..., space60y(x2), jskadiang, Ryan(2), Helter, mordecainyc, many more
User avatar
Mudfuzz
HERO
HERO
Posts: 16705
Joined: Sat Jul 07, 2007 7:06 pm
Location: The gloomy lands of the northwest

Re: Any help for an ILF'er?

Post by Mudfuzz »

wsas3 wrote:Don't have batteries, thats the only reason I'm not sure it doesnt work. But i put it as the only thing in the chain, doesnt work. No battery in there, doesnt work. Different cords, doesnt work and so on so forth

You say you have a onespot... do you have the 9v adapter? If so try that, just leave the bat compartment open and try pressing the actual switch with your finger. The only thing I have ever had go wrong on bosses over the years is the power jack...
User avatar
wsas3
IAMILF
IAMILF
Posts: 2406
Joined: Wed Feb 02, 2011 8:24 pm
Location: NYC

Re: Any help for an ILF'er?

Post by wsas3 »

the led turns on, implying ther power jack is fine (i think?) and yeah its the 9v adapter
Chankgeez wrote:True, but you can also use the Klon as a tremolo. Just stomp on the switch as fast or slow as you'd like.
Good dealings with: benjuro, hatshirt(2), Eric!, insubordination, theavondon, skullservant, Ilikewater, GardenoftheDead, AndyTran, behndy, JerryTRCD, StopReferencing, philibis, jfrey, bob the robot, Noise..., space60y(x2), jskadiang, Ryan(2), Helter, mordecainyc, many more
User avatar
Mudfuzz
HERO
HERO
Posts: 16705
Joined: Sat Jul 07, 2007 7:06 pm
Location: The gloomy lands of the northwest

Re: Any help for an ILF'er?

Post by Mudfuzz »

So you are getting power but no signal then? Well I guess you could take the back off and see if any of the solder joints on the jacks ect have come undone? That's about the best I can do.. But you might want to post this down in DIY just in case one of the dudes that know their shit don't notice or click on this thread...
User avatar
warwick.hoy
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 5226
Joined: Fri Jun 11, 2010 2:34 am
Location: Spokanistan, WA
Contact:

Re: Any help for an ILF'er?

Post by warwick.hoy »

Do we know how old it is?

Octave or Octaver (older OC-2s were named Octaver and later the "r" was dropped)?

ACA or PSA?

I guess it should work if it you are trying to power an ACA BOSS pedal with a 1spot/PSA; just not as well as and the LED will be dim. If it's an ACA pedal you'll want to daisy chain it off a PSA powered pedal (both power and route the signal), or run it off an ACA power supply,...or use a battery.

http://www.bossarea.com/other/aca.asp

In case you didn't know,...but everyone here seems pretty savvy and this is likely common knowledge. Just saying

:)
behndy wrote:"huh. i'm on acid."
Noiseprov/Pedalcore:
Mecha Shiva on Soundcloud.

WHY DID JOHNNY KILL? on Bandcamp. <--Beer Fund

Good Dealings with: futuresailors, Eric!, Multi_S, hatshirt, leastwise, Dr. Sherman Sticks M.D
Post Reply