Ibanez CS5 - how to remove the dry signal? schematic inside

AC128 · Post by **AC128** » Thu Sep 01, 2011 7:41 am

Hey.

Another 'how do I remove the dry signal' thread.

What do I have to do to turn the CS5 into a Vibrato?

Schematic:
http://www.freeinfosociety.com/electron ... hp?id=2315

thanks, appreciate it!

McSpunckle · Post by **McSpunckle** » Thu Sep 01, 2011 8:49 am

Looks like clipping C30 would do it.

AC128 · Post by **AC128** » Thu Sep 01, 2011 9:27 am

McSpunckle wrote:Looks like clipping C30 would do it.

thanks so much, it worked perfectly!

killing the dry signal turned a useless effect into something pretty cool.
also, I found two trim pots inside that I didn't know of

Jero · Post by **Jero** » Thu Sep 01, 2011 12:02 pm

One or both of those trimmers might be set for something like optimal noiseless function, so changing may cause unwanted distrortion/buzz. I'm sure you have a meter, just check before twisting.

AC128 · Post by **AC128** » Thu Sep 01, 2011 2:12 pm

Jero wrote:One or both of those trimmers might be set for something like optimal noiseless function, so changing may cause unwanted distrortion/buzz. I'm sure you have a meter, just check before twisting.

thanks,

will do!

ilovefuzz.com

Ibanez CS5 - how to remove the dry signal? schematic inside

Ibanez CS5 - how to remove the dry signal? schematic inside

Re: Ibanez CS5 - how to remove the dry signal? schematic ins

Re: Ibanez CS5 - how to remove the dry signal? schematic ins

Re: Ibanez CS5 - how to remove the dry signal? schematic ins

Re: Ibanez CS5 - how to remove the dry signal? schematic ins