Modtone Power plant power supply question

General Gear Discussion - effects, synths, etc.

Moderator: Ghost Hip

Post Reply
User avatar
mmelnick
interested
interested
Posts: 47
Joined: Fri Apr 01, 2011 10:40 pm
Location: Springfield Gardens, N.Y.
Contact:

Modtone Power plant power supply question

Post by mmelnick »

Dumb question but i'm not sure of the answer so bear with me. I alreadypretty much know the answer and I emailed Modtone but no reply yet.
There are 7 9v dc outputs on the Modtone Power plant - can any of them be ganged? I want to use 8 pedals

MXR Phase 100
Boss DD7
Boss CE5
EH #1 echo
Digitech Grunge
Digitech Death Metal
Korg Pitchblack tuner
Boss Fuzz

I suppose I could use the utility AC to power the 8th pedal, but i'd rather not.
What other Power supply has 8 outputs, an AC utility jack AND an ac 9v output (good for my Jomox t-resonator)
User avatar
oldangelmidnight
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 3749
Joined: Sat Aug 08, 2009 12:17 pm
Location: Northampton, MA

Re: Modtone Power plant power supply question

Post by oldangelmidnight »

Reports seem to indicate that the outputs are 1000mA so you should be fine to run a couple of pedals from each.
User avatar
mmelnick
interested
interested
Posts: 47
Joined: Fri Apr 01, 2011 10:40 pm
Location: Springfield Gardens, N.Y.
Contact:

Re: Modtone Power plant power supply question

Post by mmelnick »

Each output is 150ma, the 9v AC output is 1000ma
User avatar
oldangelmidnight
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 3749
Joined: Sat Aug 08, 2009 12:17 pm
Location: Northampton, MA

Re: Modtone Power plant power supply question

Post by oldangelmidnight »

Ah, well, you should be fine doubling up the fuzzes, anyway.
Hacken
committed
committed
Posts: 400
Joined: Mon Jan 31, 2011 5:16 am

Re: Modtone Power plant power supply question

Post by Hacken »

link one from the Pitchblack, it has an 9v output.
User avatar
mmelnick
interested
interested
Posts: 47
Joined: Fri Apr 01, 2011 10:40 pm
Location: Springfield Gardens, N.Y.
Contact:

Re: Modtone Power plant power supply question

Post by mmelnick »

good idea thanks
User avatar
mmelnick
interested
interested
Posts: 47
Joined: Fri Apr 01, 2011 10:40 pm
Location: Springfield Gardens, N.Y.
Contact:

Re: Modtone Power plant power supply question

Post by mmelnick »

Unfortunately the EH echo-1 requires 200ma so the Power Plant is out. What do you guys know to be the power supply with the most milliamps per effect/section?
Post Reply