INFANEM the driving notion clone

eatyourguitar · Post by **eatyourguitar** » Wed Jul 15, 2020 12:56 pm

work in progress

mcatano · Post by **mcatano** » Wed Jul 15, 2020 4:14 pm

very cool, excited to see this come together.

DannDubbleEwe · Post by **DannDubbleEwe** » Thu Jul 16, 2020 8:22 pm

eatyourguitar · Post by **eatyourguitar** » Mon Jul 20, 2020 1:21 am

moved stuff around a few times. I still need to arrange all the labels. this fits inside a 125B.

imJonWain · Post by **imJonWain** » Mon Jul 20, 2020 9:28 am

Nice! I love making wavey traces in Eagle.

eatyourguitar · Post by **eatyourguitar** » Fri Jul 24, 2020 9:32 am

all the pots were on the wrong side of the PCB. so I had to rip stuff up and redo it. I placed all the labels. now I need to finish doing measurements of cap values so I can get this thing shipping ASAP. sorry to keep you waiting.

eatyourguitar · Post by **eatyourguitar** » Sat Jul 25, 2020 3:12 pm

Imjonwayne I see C5 listed twice on the annotated PCB you sent me. Can you check again? One is ceramic 930nF the other is 98nF. Near Q7 C5 near Q4 C5. Im away from my computer at the moment. I haven't looked at the schematic yet. It is probably something really obvious but I wanted to get your thoughts on it.

imJonWain · Post by **imJonWain** » Sat Jul 25, 2020 4:41 pm

Typo, sorry! Between C14 and C2/near Q7 should be C15 not C5.

eatyourguitar · Post by **eatyourguitar** » Sat Jul 25, 2020 5:35 pm

ok thanks. I will be ready to order the PCB pretty soon. I have to desolder C8 now. the meter does not want to do C8 in circuit.

eatyourguitar · Post by **eatyourguitar** » Tue Jul 28, 2020 12:27 am

although I do not own the name INFANEM, I have released a drawing of a schematic that I believe is a close approximation of what we found when we looked inside. this drawing I made is now in the public domain until further notice. defer to INFANEM with questions regarding the use of the name INFANEM.

ibarakishi · Post by **ibarakishi** » Tue Jul 28, 2020 12:31 am

super excited! when will you think you will have time to try it out to see if it works as expected?

eatyourguitar · Post by **eatyourguitar** » Tue Jul 28, 2020 12:56 am

I am ordering the PCB from the factory in china tomorrow. it will take up to 30 days to receive it. sometimes I get lucky then it only takes 18 days. then I need to build the guitar pedal. I have mouser parts orders almost every week. I think I will have all the parts here waiting before the PCB arrives here. I already ordered the 5K and 10K pots last week but they have not arrived yet.

also, I don't have any doubts that this is the correct circuit. I will definitely test it. I mention this because I don't think there will be any problems. I think it is correct. thanks for letting me do this. it was good fun. I'm glad that I could give back to the community. I will keep you up to date on the new build. I know you have been waiting months for this. I will do it as fast as I can.

ibarakishi · Post by **ibarakishi** » Tue Jul 28, 2020 1:07 am

don't worry about rushing, i understand everyone's situation currently and its just good that people are safe and healthy. im happy that i was able to give back to the community in some way as well. its one of the most valued and used pedals i own for both recording and playing. im glad it will be available for people to enjoy and use as much as i have. thanks again to imjonwayne for your help in the process as well.

good teamwork clang gang

DannDubbleEwe · Post by **DannDubbleEwe** » Tue Jul 28, 2020 11:22 am

AWESOME WORK! So stoked for this! Thank you both so much. The Clang Gang CLANGZ

mcatano · Post by **mcatano** » Tue Jul 28, 2020 12:04 pm

And already there's a vero layout:
http://dirtboxlayouts.blogspot.com/2020 ... otion.html

ilovefuzz.com

INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone

Re: INFANEM the driving notion clone