Let's see your finished DIY projects!

[UglyCasanova]

Even more mods to the Blackfly/ScrapYard.
Arcade button to generate sound. Toggle between a searing synth sound or a dark bass/drone. Fine tune or mangle with side knob. Add noise that follows the delay time with the last toggle.



Short clip of trying out the arcade button:
https://www.instagram.com/p/BeYl43WDK8R ... k3ntsommer

[BetterOffShred]

A dude on DIYsb's made a delay that adds ring mod to the repeats, I got board from him for just general purposes but I thought of your scrap yard when I got it .. I might try to copy your delay add idea, but use the ring mod delay .. nice work man. It's inspiring.

[SoaringTortoise]

Most of the parts came from an old Silvertone table top tube radio and the side of a barn.
[youtube]http://www.youtube.com/watch?v=rLNADMVyXFs[/youtube][youtube]http://www.youtube.com/watch?v=nYeHl_0vmTw[/youtube]

[ibarakishi]

Most of the parts came from an old Silvertone table top tube radio and the side of a barn.
[youtube]http://www.youtube.com/watch?v=rLNADMVyXFs[/youtube][youtube]http://www.youtube.com/watch?v=nYeHl_0vmTw[/youtube]

wow, sounds really great ST. Checked out your site and love the small lunchbox heads you do too. Have reeeeeeally been wanting something small like that for a long time

[fuzzonaut]

Absolute beginner here, on the left, my very first build, a Bazz Fuzz (Fuzzdog kit), that worked right away.
Then I got excited and tried to build a ColorTone Bass Fuzz next, which of course isn't working ....

Tired of trouble shooting, I decided to go back to 1-knob fuzzes and built another Bazz Fuzz, the one on the right, this time using a different diode and socketing the transistor.

Next up is a Dark Grime, then I'll try a Mojo Dust. After that I might go back to trouble shoot that damned ColorTone ...

[crochambeau]

After that I might go back to trouble shoot that damned ColorTone ...

Troubleshooting is often far more educational than following a recipe. It's a humbling experience, but, in my opinion, one to look forward to.

Most of the parts came from an old Silvertone table top tube radio and the side of a barn.
[youtube]http://www.youtube.com/watch?v=rLNADMVyXFs[/youtube][youtube]http://www.youtube.com/watch?v=nYeHl_0vmTw[/youtube]

Excellent work! I really like the milder harmonic distortion on the lower frequencies at lower gain settings. Dreamy.

[fuzzonaut]

After that I might go back to trouble shoot that damned ColorTone ...

Troubleshooting is often far more educational than following a recipe. It's a humbling experience, but, in my opinion, one to look forward to.

Yeah, no doubt, troubleshooting actually was quite educational so far, even if the thing still doesn't work.

I just needed a break / something else to work on ...

[imJonWain]

I love your amp builds, I'm glad some one else is into that type of work vs the high end amps.

[ibarakishi]

Excellent work! I really like the milder harmonic distortion on the lower frequencies at lower gain settings. Dreamy.

I love your amp builds, I'm glad some one else is into that type of work vs the high end amps.

[AZX309]

Absolute beginner here, on the left, my very first build, a Bazz Fuzz (Fuzzdog kit), that worked right away.
Then I got excited and tried to build a ColorTone Bass Fuzz next, which of course isn't working ....

Tired of trouble shooting, I decided to go back to 1-knob fuzzes and built another Bazz Fuzz, the one on the right, this time using a different diode and socketing the transistor.

Next up is a Dark Grime, then I'll try a Mojo Dust. After that I might go back to trouble shoot that damned ColorTone ...

Troubleshooting is often far more educational than following a recipe. It's a humbling experience, but, in my opinion, one to look forward to.

I agree with that sentiment. i've learned more about building/how things work from busting out a multimeter than anything else.
And thank you i appreciate the consideration

[BetterOffShred]

I love your amp builds, I'm glad some one else is into that type of work vs the high end amps.

It probably sounds just as good or better.

[SoaringTortoise]

I love your amp builds, I'm glad some one else is into that type of work vs the high end amps.

It probably sounds just as good or better.

Thanks. I do my best to make them sound good, looks are a secondary consideration when you're working with junk.
I think all the cool builds in this thread represent what the big corps and hi-end guys are missing about the whole music scene in general. Musicians are individuals and want to reflect that individualism in their music and with their gear.

Excellent work! I really like the milder harmonic distortion on the lower frequencies at lower gain settings. Dreamy.

Thanks. I think that sound is due to the relatively low voltages (250V B+) the amp runs at because of the 6X5GT rectifier tube.

[cherler]

I'm bummed I didn't have this finished in time for BILF, but it's done now! This is the newest version of the fancy ABY I've been working on! There's still a little noise due to the output stages not being grounded when they aren't in use, and I'm still working out exactly what I want out of this thing, but I'm pretty happy with this one!

Technical bullshit: (reads like a vague sales pitch so nsfw, proceed with caution)

NSFW: show

It uses two effects loops, A and B, and lets you run just A, just B, Y, series with A>B, and series with B>A. The mode you're in is lit up purple at the top, and red/blue leds tell you exactly where the red and blue switches (center and right most) will take you. You can switch what order the modes cycle in by double tapping the phase inverting switch on the left. A single tap on the left switch just inverts the phase on loop B just in case there's any phase issues.

It does trails when switching away from a loop if you want, and can also leave the input connected so time effects can fill up before you switch to them. There's toggle, momentary, and both together modes for the foot switches as well.

It outputs to one or two amps, and gives you two options for the series modes. In one setting, one amp is left silent and the other amp gets the signal from the two loops in series. In the other mode, after your signal goes through the first loop it splits and goes to one amp while also going through the second loop and out to the second amp. When using only one amp, both modes still work, but the second mode leaves you mixing signal from just one loop with signal from both loops at the end before leaving the pedal.

There's a light boost of about 6db, which also attenuates down to zero to help manage levels. The whole thing can run at 9v or 18v for more headroom, and I'm only building simple fuzzes from now on.

[Dr. Sherman Sticks M.D.]

a lil budding tradition of mine for the last couple NAMMs.
try to do something new with what you already have.

this time, i tried modding some samplers that i already own/cherish.

the SX had some particularly scary moments.
killed the audio twice while trying to solder to the microscopic SMD points.

https://www.instagram.com/p/BfEj0gYn_dd/
[youtube]http://www.youtube.com/watch?v=-J0jJPYTcPc[/youtube]

[frodog]

First finished pedal y'all. T-Amp PCB from Mask Audio Electronics. An easy build which I did in parallel with three other circuits (yet-to-be-boxed). Of course the enclosure was the most time-consuming. I drilled, sanded and washed it, then sprayed it with a grey base coat, then pink (sanded), then painted it with various model paints I had lying around, and finished it with like 5-6 coats of clearcoat.

The inside looks a bit rough but everything works. Had to mount the short-legged pot above the PCB with some solid copper phone wire. Fitting the LED was among the more difficult things, it's a big one and wouldn't fit under the circuit board as I had hoped (guess I could have mounted it sideways). I used one of those transparent round LEGO "lights" as a bezel (need to lacquer the top, that sunken hole is gonna collect dirt) and Sugru mouldable glue holds it in place. Floating 5.6k resistor for extra dimness.

Oh, and it sounds great! Can't wait to box up the SFD next (also from MAE).