PSA: Little Bear Electronics

General Gear Discussion - effects, synths, etc.

Moderator: Ghost Hip

Post Reply
User avatar
ck3
FAMOUS
FAMOUS
Posts: 1086
Joined: Wed Feb 24, 2016 10:59 pm
Location: Southcentral, CT, USA

PSA: Little Bear Electronics

Post by ck3 »

As of today, I have received a total of 3 defective pedals produced by Little Bear including their R.attack, MB1 (Wooly Mammoth clone), and Tube Booster. The R.attack and Tube Booster both produced variations of the same humming noise that rendered them unsuable, and the MB1 was probably wired backwards given that the battery clip is bypassed when the output (not input) jack is unplugged and its tonality significantly differs from YouTube demo videos. The Tube booster may have actually come with a defective power supply, but I'm still returning it. Though the R.attack and Tube Booster were pretty decent-sounding other than the noise, I won't be spending any more money on Little Bear products. They need to majorly up their QC game. I'm not certain if other ILF'ers have more positive experiences with this brand, but still wanted to share mine, especially given that all products I've ordered from their distributor, Nobsound (via Amazon) have been defective in some way, shape,or form. :mad:
User avatar
JonnyAngle
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 4233
Joined: Wed Feb 25, 2015 11:35 am
Contact:

Re: PSA: Little Bear Electronics

Post by JonnyAngle »

I had their mammoth clone.

7/10 for the mammoth sound.
User avatar
whoismarykelly
FAMOUS
FAMOUS
Posts: 1900
Joined: Sun Nov 28, 2010 1:25 pm

Re: PSA: Little Bear Electronics

Post by whoismarykelly »

Wiring the battery switching on the output jack isn't 'backwards.' Its just a different choice someone might make. Boss loopers are all wired to connect the battery on the output jack instead of the input.
User avatar
ck3
FAMOUS
FAMOUS
Posts: 1086
Joined: Wed Feb 24, 2016 10:59 pm
Location: Southcentral, CT, USA

Re: PSA: Little Bear Electronics

Post by ck3 »

The model name for the Wooly Mammoth clone was actually "BS1" (ironically enough). Even if the alternate wiring was by choice (and/or to avoid a copyright infringement lawsuit), there are still aspects of the pedal's tonality that make me wonder if it is built correctly. Results are marginally more pleasing with extended range guitars, but online demos of this pedal don't sound as scooped or bassy as what emanates from my rig (which has a relatively flat EQ). Still, I have to admit that the dual LED mammoth eyes are cute ... and there is a reference to some sort of "mod" in the pedal artwork.
User avatar
Jero
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11288
Joined: Fri Mar 12, 2010 1:12 am
Location: here

Re: PSA: Little Bear Electronics

Post by Jero »

I have the r.attack, and while the sweep is wayyy different, you can get rat sounds out of it...and it works fine.

The leds get brighter the closer your hand gets to the enclosure though, which I find too amusing. If you want to pay shipping, you can have it. I never use it.
I make noise toys under Stomping Stones
[url=http://www.stompingstones.com[/url]
oldangelmidnight wrote:This is the classic ILF I love. Emotional highs and lows. Scooped mids in my heart all day long.
User avatar
Strange Tales
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 4499
Joined: Fri Feb 06, 2015 7:14 pm
Location: America's Sorrow: New Jersey
Contact:

Re: PSA: Little Bear Electronics

Post by Strange Tales »

Bought a R.attack on here and it's now my main dirt pedal. For $30, that thing kicks the shit out of any other pedal I used. Had a few issues with it not outputting sound, but I think that was just a loose cable inside and it works now. LED clip mode on that thing slays 4 days.
木枯らし // 木漏れ日 // 風に綱は戦ぐ

Strange Tales Distro - Japanese Underground Music Distribution in the US
Invisible Man wrote:Strange Tales: putting the ‘weeb’ in ‘dweeb’ since whenever.
User avatar
resincum
Supporter
Supporter
Posts: 3883
Joined: Fri Oct 24, 2014 12:30 am
Location: el paso

Re: PSA: Little Bear Electronics

Post by resincum »

Strange Tales wrote:Bought a R.attack on here and it's now my main dirt pedal. For $30, that thing kicks the shit out of any other pedal I used. Had a few issues with it not outputting sound, but I think that was just a loose cable inside and it works now. LED clip mode on that thing slays 4 days.
:rock: agreed. thing absolutely rules for how cheap it is. apparently the quality on these is hit or miss tho :facepalm:
i'm glad i can call you a friend. even if i'll never see you again
Image
User avatar
Antlerface
experienced
experienced
Posts: 791
Joined: Fri Jun 17, 2016 1:55 am

Re: PSA: Little Bear Electronics

Post by Antlerface »

I liked my Rat from them.

I bet a nice email would get ya working replacements?
User avatar
comesect2.0
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 4372
Joined: Sat Oct 22, 2016 10:44 pm
Location: TX
Contact:

Re: PSA: Little Bear Electronics

Post by comesect2.0 »

Haven't I seen those mammoths on ebay for 20 bucks or somthing....makes sense...
User avatar
ck3
FAMOUS
FAMOUS
Posts: 1086
Joined: Wed Feb 24, 2016 10:59 pm
Location: Southcentral, CT, USA

Re: PSA: Little Bear Electronics

Post by ck3 »

Antlerface wrote:I liked my Rat from them.

I bet a nice email would get ya working replacements?
Amazon only gave me the option of arranging a return, which makes zero sense to me from a financial perspective. I guess a more functional replacement unit or power supply costs more to source than return shipping. :idk:

I should clarify that the most functional of the three pedals came from Doukaudio and that the duds were distributed by Nobsound.

Thanks to all who've chimed in with mojo, feedback, reports, etc. I'm legitimately curious about the QC at Little Bear after my recent experiences.
Jero wrote:I have the r.attack, and while the sweep is wayyy different, you can get rat sounds out of it...and it works fine.

The leds get brighter the closer your hand gets to the enclosure though, which I find too amusing. If you want to pay shipping, you can have it. I never use it.
Thanks so much for the offer. The great Rat hunt of 2016 ended with a Yellowcake Furry Burrito, and I'm now beginning to venture into Klone territory of all places.
User avatar
MechaGodzilla
IAMILF
IAMILF
Posts: 2447
Joined: Wed Jun 26, 2013 11:19 am

Re: PSA: Little Bear Electronics

Post by MechaGodzilla »

I had one of the rattacks and it was squealy and bad but then I don't think I like rats very much.
User avatar
Antlerface
experienced
experienced
Posts: 791
Joined: Fri Jun 17, 2016 1:55 am

Re: PSA: Little Bear Electronics

Post by Antlerface »

Also I just got a fantastic Rat clone w the same Rattack mods and then some from a dude on Reddit, $120. If you want his info I'll be happy to send it along. It's the best Rat I've used that does the 'rat, you dirty, and Turbo' thing. Also has an Lm308 and the Reutz mod switch.
User avatar
goosekevin
Supporter
Supporter
Posts: 2236
Joined: Tue Jul 10, 2012 10:25 pm
Location: NSW Australia

Re: PSA: Little Bear Electronics

Post by goosekevin »

bummer yours have broken, i really like my rat from them so hopefully it holds out
Derelict78 wrote:That probably sounds awful in the best possible way.
Post Reply