DOD/Black Arts Toneworks Boneshaker Distortion

General Gear Discussion - effects, synths, etc.

Moderator: Ghost Hip

Post Reply
User avatar
01010111
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 4789
Joined: Sun Mar 29, 2009 3:48 pm
Location: Frogtown

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by 01010111 »

I don't like the shitstorms spilling over from TB lately... This isn't TB2, this is ILF
BossMann73
committed
committed
Posts: 305
Joined: Fri Feb 17, 2017 5:21 pm

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by BossMann73 »

01010111 wrote:I don't like the shitstorms spilling over from TB lately... This isn't TB2, this is ILF
I agree although I thought it was a legit thing to bring up and it was only talked about at that bullshit nunnery. Since there's no more examples of that, that's the last I'll refer to that place.
GardenoftheDead
IAMILF
IAMILF
Posts: 2950
Joined: Mon Oct 31, 2011 12:26 pm

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by GardenoftheDead »

neonblack wrote:Well I personally have been wanting one of these for a while. I'm just poor as fuck so this was the perfect time for me to snag one!

Someone mentioned Sonic Youth tones in another thread. I know it's meant for low tuned instruments but I'm imagining I can get some nasty harsh tones out of it too if I want
Well Sonic Youth routinely used Low C tunings so it can do both!
User avatar
BitchPudding
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 4997
Joined: Wed Mar 14, 2012 9:14 pm
Location: Nightosphere, Hell

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by BitchPudding »

Really stoked on this. Timing couldnt be better ether. Still having switch issues with my twosome so if this works well enough it may cery well replace it as my high gain fuzz sound.
ummohyeah wrote:Godspeed rule and no amount of tape would make their pedalboards safe from my cum.
BitchPudding wrote: No, I'm THE bitch. The only one allowed here.

How dare you sully my good name.
Image
YO YO ITS YA BOI
You can find my band here. We are Phantoms Forever.
https://phantomsforever.bandcamp.com/
https://open.spotify.com/artist/6jlCzvM ... uJz3_ZbcSw
https://www.instagram.com/phantomsfor3v ... c0MzIxNw==
D Rock
committed
committed
Posts: 209
Joined: Wed Sep 02, 2015 12:25 am

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by D Rock »

Don't need this as my dirt section is so legit as is but what the hell. For 40 bucks I bet it can be a badass boost with the gain turned down and then using the para-eq to boost specific frequencies. Looking forward to playing around with it though, and DOD has been killing it as of late so I imagine thing will rip as well.
User avatar
DRodriguez
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 3666
Joined: Thu Apr 09, 2015 1:40 pm
Location: Brooklyn

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by DRodriguez »

I'm in it just for the eq. Digitechrep, any idea on the max boost/cut, frequency ranges, and what kind of q action this thing has?
User avatar
ck3
FAMOUS
FAMOUS
Posts: 1086
Joined: Wed Feb 24, 2016 10:59 pm
Location: Southcentral, CT, USA

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by ck3 »

Digitechrep posted some info on its EQ in the sale PSA thread on TGP.

Does it sound less diffuse than the Black Sheep Fuzz, or can it properly fill sonic spaces without post gain in the equation?
User avatar
Tom Von Kramm
committed
committed
Posts: 174
Joined: Mon Feb 08, 2016 7:29 pm

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by Tom Von Kramm »

I can't remember what the frequency centers are off the top of my head TBH, I'm going to take a look at the schematic tomorrow and get that info. I ran out of time today.
Hi I'm Tom Cram, I'm the Main Dude at Spiral Electric FX.
User avatar
Jwar
Cosmic of BILF
Cosmic of BILF
Posts: 18239
Joined: Thu Dec 02, 2010 7:18 pm
Location: The edge of existence

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by Jwar »

DigiTechRep wrote:I can't remember what the frequency centers are off the top of my head TBH, I'm going to take a look at the schematic tomorrow and get that info. I ran out of time today.
Can you tell us why this is being blown out?

I remember when you let me try it at Namm with that amazing 6k Warwick bass and I bought shit my pants. LOL. Seriously amazing pedal.
"I do not have the ability to think rationally 90% of the time and I also change my mind at the drop of a hat".

-JWAR :)
User avatar
Tom Von Kramm
committed
committed
Posts: 174
Joined: Mon Feb 08, 2016 7:29 pm

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by Tom Von Kramm »

jwar wrote:
DigiTechRep wrote:I can't remember what the frequency centers are off the top of my head TBH, I'm going to take a look at the schematic tomorrow and get that info. I ran out of time today.
Can you tell us why this is being blown out?

I remember when you let me try it at Namm with that amazing 6k Warwick bass and I bought shit my pants. LOL. Seriously amazing pedal.
It is simply overstocked and we have to clear some out. I've been dragging my feet on this but the recent move of Harman Warehousing from Elkhart to Moreno Valley brought some scrutiny from the gods and my hand was forced. ;)
Hi I'm Tom Cram, I'm the Main Dude at Spiral Electric FX.
User avatar
actual
IAMILF
IAMILF
Posts: 2925
Joined: Thu Nov 03, 2016 8:50 pm
Location: Denmark

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by actual »

DigiTechRep wrote:
jwar wrote:
DigiTechRep wrote:I can't remember what the frequency centers are off the top of my head TBH, I'm going to take a look at the schematic tomorrow and get that info. I ran out of time today.
Can you tell us why this is being blown out?

I remember when you let me try it at Namm with that amazing 6k Warwick bass and I bought shit my pants. LOL. Seriously amazing pedal.
It is simply overstocked and we have to clear some out.
I don't understand how that works. Like, a) why not just keep it at the regular price, or do a slight discount, and get more money in? and b) doesn't lowering the price of a piece of gear that much, make it less attractive in some ways, as it is now a "40$ pedal"?
Mixing and mastering? Makeshift Audio
User avatar
Tom Von Kramm
committed
committed
Posts: 174
Joined: Mon Feb 08, 2016 7:29 pm

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by Tom Von Kramm »

actualidiot wrote:
DigiTechRep wrote:
jwar wrote:
DigiTechRep wrote: I don't understand how that works. Like, a) why not just keep it at the regular price, or do a slight discount, and get more money in? and b) doesn't lowering the price of a piece of gear that much, make it less attractive in some ways, as it is now a "40$ pedal"?
I already tried a discount, as well as BOGO, and it didn't take.

Lowering the price usually makes it more attractive for people to try, not less. Stuff gets put on sale all the time due to overstock, pedals operate under the same market principles and pressures.
Hi I'm Tom Cram, I'm the Main Dude at Spiral Electric FX.
User avatar
actual
IAMILF
IAMILF
Posts: 2925
Joined: Thu Nov 03, 2016 8:50 pm
Location: Denmark

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by actual »

DigiTechRep wrote:
actualidiot wrote:
DigiTechRep wrote:
jwar wrote:
DigiTechRep wrote: I don't understand how that works. Like, a) why not just keep it at the regular price, or do a slight discount, and get more money in? and b) doesn't lowering the price of a piece of gear that much, make it less attractive in some ways, as it is now a "40$ pedal"?
I already tried a discount, as well as BOGO, and it didn't take.

Lowering the price usually makes it more attractive for people to try, not less. Stuff gets put on sale all the time due to overstock, pedals operate under the same market principles and pressures.
Okay, only asking cause I don't understand it. I can only speak for myself, but when I see an expensive piece of gear, I usually see the high price as a mark of quality.
Mixing and mastering? Makeshift Audio
BossMann73
committed
committed
Posts: 305
Joined: Fri Feb 17, 2017 5:21 pm

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by BossMann73 »

I'm happy to get the discount, but man the people trying to sell theirs on Reverb right now must be pissed!
User avatar
Tom Von Kramm
committed
committed
Posts: 174
Joined: Mon Feb 08, 2016 7:29 pm

Re: DOD/Black Arts Toneworks Boneshaker Distortion

Post by Tom Von Kramm »

The best wristwatch I own I bought at a blowout sale and I saved literally hundreds of dollars. The quality is the same and I feel like I got a bargain, not a rip-off. Everyone is of course, free to feel however they want and no one is being forced to buy anything they don't want.
Hi I'm Tom Cram, I'm the Main Dude at Spiral Electric FX.
Post Reply