Let's see your PEDAL BOARD!

General Gear Discussion - effects, synths, etc.

Moderator: Ghost Hip

Post Reply
User avatar
sevenSHARPnine
IAMILF
IAMILF
Posts: 2722
Joined: Mon Oct 19, 2009 8:56 pm
Location: Orange County, California

Re: Let's see your PEDAL BOARD!

Post by sevenSHARPnine »

retinal orbita wrote:Image

Here's my travel board, which rotates daily since I commute by subway to my practice space. Not pictured are a Swollen Pickle, EHX 70's Small Stone and a Crybaby 535Q wah...... It cost about 8 bucks for the paint & velcro, they cut me a piece of wood to spec for free at the lumber yard......

Image

Fits in the case, some gator thing built for a microkorg, cost was about 20 bucks.......

I'm planning on buying a bigger synth case with a bigger piece of wood as the base to hold all my pedals so I can alternate between boards depending on my mood........ because when I made this I wasn't using my wah as much and now I want to take it everywhere.......

:thumb: :thumb:
McSpunckle wrote:Pee, on the other hand, is full of other things that make it more conductive. That's why you don't pee outside in a lightning storm without first putting on your steel dick sheath.
htsamurai wrote:sharpie is my hero and lover
http://www.youtube.com/sevensharpnine
User avatar
Inertia
committed
committed
Posts: 226
Joined: Tue Oct 20, 2009 9:18 am
Location: Manhattan, Illinous

Re: Let's see your PEDAL BOARD!

Post by Inertia »

Image
Image
Image
skip
FAMOUS
FAMOUS
Posts: 1368
Joined: Tue Dec 16, 2008 12:46 pm

Re: Let's see your PEDAL BOARD!

Post by skip »

just finally got mine set up fairly close and got a pedaltrain-- pics soon--- but man i feel so good to get organized
User avatar
Inertia
committed
committed
Posts: 226
Joined: Tue Oct 20, 2009 9:18 am
Location: Manhattan, Illinous

Re: Let's see your PEDAL BOARD!

Post by Inertia »

I'm loving it.
I'm still programing some presets but in general it's just amazing to have a tunable ring mod.

Fun things to do -
1. Play chords into the ring mod while holding down the tuner switch so as to confuse the ring mod into retuning itself randomly.
2. Whammy
3. tuned ring mod
4. Bass
5. Organ tone with chords on 1 octave up
6. Harmonizer
7. Square wave, ramp up, and ramp down pitchshifter
8. Whammy and Square wave pitchshifter simultaneously
9. Tune a ring mod to the wrong note, but as a harmony of the root note of the key you are playing in.

AKA tune to G and play in E minor, the relative minor to G major.
Or tune to Bb and play in F Major. F being a perfect 5th of Bb.

You start to learn how different interval tunings sound with minor and major keys and it just becomes so fun.
Plus if you tune a preset to A, you can use it as a tuner :thumb:
User avatar
moose23
experienced
experienced
Posts: 648
Joined: Tue Oct 13, 2009 9:58 am

Re: Let's see your PEDAL BOARD!

Post by moose23 »

Here's the latest incarnation of my pedals..

Korg Pitchblack tuner > DIY Dirt Section of the Box of Rock > Modded Russian Big Muff > Sansamp VT Bass

The BOR and VTBass are always on so they don't need to be switched easily. Really happy with this set up now, may even have to make a board for them.

Image
User avatar
theavondon
Supporter
Supporter
Posts: 10742
Joined: Tue Mar 16, 2010 2:58 am
Location: Denton, TX

Re: Let's see your PEDAL BOARD!

Post by theavondon »

moose23 wrote:Here's the latest incarnation of my pedals..

Korg Pitchblack tuner > DIY Dirt Section of the Box of Rock > Modded Russian Big Muff > Sansamp VT Bass

The BOR and VTBass are always on so they don't need to be switched easily. Really happy with this set up now, may even have to make a board for them.

Image


That's just sick. Like, cool album cover level sick.
TAKE ME TO YOUR LEADER
User avatar
moose23
experienced
experienced
Posts: 648
Joined: Tue Oct 13, 2009 9:58 am

Re: Let's see your PEDAL BOARD!

Post by moose23 »

theavondon wrote:
moose23 wrote:Here's the latest incarnation of my pedals..

Korg Pitchblack tuner > DIY Dirt Section of the Box of Rock > Modded Russian Big Muff > Sansamp VT Bass

The BOR and VTBass are always on so they don't need to be switched easily. Really happy with this set up now, may even have to make a board for them.

Image


That's just sick. Like, cool album cover level sick.


That's a great compliment thanks. Just waiting on some knobs I've ordered, then the BOR will match the VTBass.
craig
interested
interested
Posts: 46
Joined: Sat Aug 29, 2009 5:15 pm

Re: Let's see your PEDAL BOARD!

Post by craig »

Image

this is most of what i was using last week in the studio. i was running my t 40 through all of this getting some gnarly sounds.
User avatar
Michael
involved
involved
Posts: 51
Joined: Sun May 09, 2010 2:06 am
Location: Andover, MN
Contact:

Re: Let's see your PEDAL BOARD!

Post by Michael »

How do you like the POG? I've been looking in to the POG2's because of the preset functions.

craig wrote:Image

this is most of what i was using last week in the studio. i was running my t 40 through all of this getting some gnarly sounds.
craig
interested
interested
Posts: 46
Joined: Sat Aug 29, 2009 5:15 pm

Re: Let's see your PEDAL BOARD!

Post by craig »

the pog i think is a very useful tool. i use it mostly for that clean suboctave boost and a little bit of the plus one and 2 octaves to bring some natural harmonics. i usually use it when..... welll wherever i can fit and need to get those ultra lows.
User avatar
Z*Z*Z
committed
committed
Posts: 400
Joined: Mon May 26, 2008 7:53 am
Location: Zrenjanin, Serbia, Europe

Re: Let's see your PEDAL BOARD!

Post by Z*Z*Z »

My over-the-top board gone wild again - working on new material/EP and the chain goes:
Fender CIJ Jag -> RR Fuzz Factory -> Line6 M13(first line of effects(comp/harmonizer/filter) - M13 loop -> Digitech EX-7 Expression Factory (not pictured, bought it yesterday) -> Boss PS-2 -> RR Rat -> Lovetone Meatball cloned (plus M-Audio Expression) -> Lovetone Ring Stinger cloned (plus photocell controller jack) -> EHX Graphic Fuzz -> RR Klon -> RR Feedback Looper Deluxe ( Alesis Quadraverb Plus in loop) -> EHX Deluxe Memory Man -> back to M13 (second, third & fourth line of effects - mod/verb/delay/looper section) -> Vox Ac30 CC1 (tube verb & tremolo)
Sorry for Crappy (with a capitol C) pics :cry:
Image
Image
Image
User avatar
theavondon
Supporter
Supporter
Posts: 10742
Joined: Tue Mar 16, 2010 2:58 am
Location: Denton, TX

Re: Let's see your PEDAL BOARD!

Post by theavondon »

Z*Z*Z wrote:My over-the-top board gone wild again - working on new material/EP and the chain goes:
Fender CIJ Jag -> RR Fuzz Factory -> Line6 M13(first line of effects(comp/harmonizer/filter) - M13 loop -> Digitech EX-7 Expression Factory (not pictured, bought it yesterday) -> Boss PS-2 -> RR Rat -> Lovetone Meatball cloned (plus M-Audio Expression) -> Lovetone Ring Stinger cloned (plus photocell controller jack) -> EHX Graphic Fuzz -> RR Klon -> RR Feedback Looper Deluxe ( Alesis Quadraverb Plus in loop) -> EHX Deluxe Memory Man -> back to M13 (second, third & fourth line of effects - mod/verb/delay/looper section) -> Vox Ac30 CC1 (tube verb & tremolo)
Sorry for Crappy (with a capitol C) pics :cry:
Image
Image
Image



Jesus thesis.
TAKE ME TO YOUR LEADER
nightraven
committed
committed
Posts: 454
Joined: Sat Jul 11, 2009 9:53 am
Location: UK

Re: Let's see your PEDAL BOARD!

Post by nightraven »

did you build the loveclones?
User avatar
Z*Z*Z
committed
committed
Posts: 400
Joined: Mon May 26, 2008 7:53 am
Location: Zrenjanin, Serbia, Europe

Re: Let's see your PEDAL BOARD!

Post by Z*Z*Z »

No, a friend :hello:
User avatar
phantasmagorovich
Supporter
Supporter
Posts: 6983
Joined: Sun Feb 28, 2010 2:31 pm
Location: Cologne, Germany

Re: Let's see your PEDAL BOARD!

Post by phantasmagorovich »

Will the friend build more for other "friends"?
Post Reply