Signal chain: a Boss OC-2 that turns on an off way too easily > Wounded Paw P90 with tape on the LED to make it less distracting > Polytune > loop switcher: fuzz side > Dunwich Fuzz Throne > Naga Viper boost also with tape to tame the super bright LED > loop switcher: clean side > Superego synth > Trinity reverb > loop switcher return > Ditto looper > JHS buffered splitter: side 1 > Echorec to a PVY VTM 60 | splitter side 2 > Ibanez Time Machine amp top echo box from the '80s into a Hovercraft Dwarvenaut 20. The swirly footswitch turns the Time Machine on and off.
The diagonal pedal is a bit of an assault on my OCD but it leaves room for all the necessary cables etc. With this arrangement I change the delay time on the Echorec every time I use the Ditto which is interesting. The Fuzz Throne is epic and sounds great no matter where you put the knobs. Everything is powered with a Voodoo Labs ISO5 plus a couple of daisy-chain cables.
Signal chain: a Boss OC-2 that turns on an off way too easily > Wounded Paw P90 with tape on the LED to make it less distracting > Polytune > loop switcher: fuzz side > Dunwich Fuzz Throne > Naga Viper boost also with tape to tame the super bright LED > loop switcher: clean side > Superego synth > Trinity reverb > loop switcher return > Ditto looper > JHS buffered splitter: side 1 > Echorec to a PVY VTM 60 | splitter side 2 > Ibanez Time Machine amp top echo box from the '80s into a Hovercraft Dwarvenaut 20. The swirly footswitch turns the Time Machine on and off.
The diagonal pedal is a bit of an assault on my OCD but it leaves room for all the necessary cables etc. With this arrangement I change the delay time on the Echorec every time I use the Ditto which is interesting. The Fuzz Throne is epic and sounds great no matter where you put the knobs. Everything is powered with a Voodoo Labs ISO5 plus a couple of daisy-chain cables.
Interestingly you would have needed to tape up the FT but on that run I used lower intensity LEDs so you got lucky.
Signal chain: a Boss OC-2 that turns on an off way too easily > Wounded Paw P90 with tape on the LED to make it less distracting > Polytune > loop switcher: fuzz side > Dunwich Fuzz Throne > Naga Viper boost also with tape to tame the super bright LED > loop switcher: clean side > Superego synth > Trinity reverb > loop switcher return > Ditto looper > JHS buffered splitter: side 1 > Echorec to a PVY VTM 60 | splitter side 2 > Ibanez Time Machine amp top echo box from the '80s into a Hovercraft Dwarvenaut 20. The swirly footswitch turns the Time Machine on and off.
The diagonal pedal is a bit of an assault on my OCD but it leaves room for all the necessary cables etc. With this arrangement I change the delay time on the Echorec every time I use the Ditto which is interesting. The Fuzz Throne is epic and sounds great no matter where you put the knobs. Everything is powered with a Voodoo Labs ISO5 plus a couple of daisy-chain cables.
Interestingly you would have needed to tape up the FT but on that run I used lower intensity LEDs so you got lucky.
I'm jamming in a new configuration (1 guitar instead of 2) so my board is about to get bigger. I am starting to look at power supplies just so I don't have to deal with constantly unplugging stuff. Time to educate myself zzzz
Noise board which is basically my bass board with a few extra bits and a Doepfer Dark Energy.
Signal path: Dark Energy > Dobsky bass > Pt999 > Hi-band Flanger > Freeze (modded with effects loop w/ HM2 > Gristlizer > Repeat Percussion in the loop) > bass looper (w/ Mutron III clone > PT80 delay with inifinite feedback switch > Ross Phaser) > Rub a dub reverb.
