Page 1 of 1
SHO in old Walco enslosure
Posted: Tue Mar 16, 2010 3:48 am
by Jero
So a long long time ago, I built a SHO, and never added a switch or put it into an enclosure. Well I got these old Walco pedals that didn't all work, so I decided to build a new SHO into the currently non working boost.
I'll add more as I go.
Re: SHO with 1n34's?
Posted: Tue Mar 16, 2010 11:44 am
by moose23
Seeing as the diode(s) are just there to protect the transistor there should be no affect on the tone at all. I'd imagine changing the input and output caps is about the only way you can change the tone.
Re: SHO with 1n34's?
Posted: Tue Mar 16, 2010 2:39 pm
by Jero
moose23 wrote:Seeing as the diode(s) are just there to protect the transistor there should be no affect on the tone at all. I'd imagine changing the input and output caps is about the only way you can change the tone.
Yea, I thought about that a little late. Will likely just not change anything.