Page 1 of 1
Re: anybody recommend a cheap flanger to bend?
Posted: Mon Oct 26, 2009 11:03 pm
by bigchiefbc
NewarkWilder wrote:I was messing around with the trimpots in my Hartman and realized you can get some pretty crazy sounds when you take it into negative feedback... I'm not gonna bend an expensive piece like that one but it got me thinking about trying to do something with something cheap I can get on ebay that will still sound half decent and w/ comfortably exposed guts. if anyone has a rec, lemme know!
My favorite cheap flanger is the old DOD FX 72/75. Analog, sounds great, and usually can be had cheap, although I'm not sure how easily accessible the guts are, since I've never really cracked it open
Re: anybody recommend a cheap flanger to bend?
Posted: Tue Oct 27, 2009 12:01 am
by Scruffie
Daphon do one the E20FL which is basically a BOSS BF-2 and they're dirt cheap new so second hand they must be stupidly cheap and they're not SMD so easier to bend.
Re: anybody recommend a cheap flanger to bend?
Posted: Wed Oct 28, 2009 12:25 pm
by Wizard
That paul gilbert flanger does some fucking cool negative feedback stuff.
but NW when you do something that rules, tell me, because i have dreams to run negative feedback through ring mods....
i have dreams of ring mods...
Re: anybody recommend a cheap flanger to bend?
Posted: Wed Oct 28, 2009 5:29 pm
by theshoegazer
As morally reprehensible as it is Dan Electro make a Fab Series Flanger that I hear is good for bends.
Re: anybody recommend a cheap flanger to bend?
Posted: Thu Oct 29, 2009 6:19 am
by the raytownian
NewarkWilder wrote:thanks! hmmm i had an old DOD flanger for a while that was really wild...
This?:
http://www.gbase.com/files/store_images ... dkk_so.jpg (huge image alert)
I have been wanting to try one of these for a while... I've really only heard good stuff about it!
Re: anybody recommend a cheap flanger to bend?
Posted: Thu Oct 29, 2009 10:26 pm
by Blurillaz
Danelectro Hashbrowns Flanger
Re: anybody recommend a cheap flanger to bend?
Posted: Wed Nov 04, 2009 1:27 pm
by Gino
bigchiefbc wrote:My favorite cheap flanger is the old DOD FX 72/75. Analog, sounds great, and usually can be had cheap, although I'm not sure how easily accessible the guts are, since I've never really cracked it open
+1 Great, cheap flanger.
the raytownian wrote:NewarkWilder wrote:thanks! hmmm i had an old DOD flanger for a while that was really wild...
This?:
http://www.gbase.com/files/store_images ... dkk_so.jpg (huge image alert)
I have been wanting to try one of these for a while... I've really only heard good stuff about it!
I tried this guy when it came out and I didn't like it compared to the FX75-B. Most of the DODs from the FX75-B era sound great and the ones from the FX747 era sounded overly processed. YMMV though...
Re: anybody recommend a cheap flanger to bend?
Posted: Thu Nov 05, 2009 6:07 pm
by jrmy
Scruffie wrote:Daphon do one the E20FL which is basically a BOSS BF-2 and they're dirt cheap new so second hand they must be stupidly cheap and they're not SMD so easier to bend.
I have a BF-2 that's getting bent (all pun intended) that should be ready ANY DAY NOW!!! Oh, the waiting, it hurts me so.
Re: anybody recommend a cheap flanger to bend?
Posted: Fri Nov 06, 2009 2:01 pm
by McSpunckle
I've been trying to sell a DOD FX75C for a long time now...
No surface mount shit... all analog...
But nobody wants it.
It's a nice flanger, damnit!
Re: anybody recommend a cheap flanger to bend?
Posted: Fri Nov 06, 2009 4:15 pm
by Bobby D
arion flanger......can be had CHEAP, as well as the phaser and anything other than the SCH-1 chorus. i got them for like $20 before.....
Re: anybody recommend a cheap flanger to bend?
Posted: Sun Nov 15, 2009 9:02 pm
by jrmy
I got my bent BF-2 back today - incoherent review & clips are at
http://ilovefuzz.com/viewtopic.php?f=149&t=7275
Re: anybody recommend a cheap flanger to bend?
Posted: Tue Jan 05, 2010 3:12 pm
by leastwise
theshoegazer wrote:As morally reprehensible as it is Dan Electro make a Fab Series Flanger that I hear is good for bends.
+1
I came upon one recently and within minutes found some cool stuff. All from adding wires between certain points.
Re: anybody recommend a cheap flanger to bend?
Posted: Wed Jan 06, 2010 12:32 am
by futuresailors
leastwise wrote:theshoegazer wrote:As morally reprehensible as it is Dan Electro make a Fab Series Flanger that I hear is good for bends.
+1
I came upon one recently and within minutes found some cool stuff. All from adding wires between certain points.
[youtube]http://www.youtube.com/watch?v=95Lv76ubxeM[/youtube]
