Page 1 of 1
Bread board help
Posted: Sun Nov 23, 2014 11:23 pm
by Paddyob
If I want to add multiple inductors to my Wah, what kind of bread board do I need.
Research says something with solder points ing the bottom.... Are there differences in boards?
I need 2"x2".
Re: Bread board help
Posted: Sun Nov 23, 2014 11:39 pm
by Mike
I assume you are talking about
perfboard, and not a
breadboard.
The answer is... we can't possibly give you an answer.
You will have to measure the pin spacing on the inductor you intend upon using. Perfboard holes are spaced at 0.1" / 2.54mm. If the pins on your inductor are not spaced at a multiple of 0.1"/2.54mm, it won't an easy fit with standard perfboard.
Mike
Re: Bread board help
Posted: Tue Nov 25, 2014 5:41 pm
by Paddyob
But I Could just use a jumper wire on the inductor posts to fit the spacing, right?
Re: Bread board help
Posted: Tue Nov 25, 2014 10:33 pm
by eatyourguitar
you could drill the stripboard
Re: Bread board help
Posted: Tue Nov 25, 2014 10:50 pm
by Paddyob
Ah I guess I could.
Re: Bread board help
Posted: Wed Nov 26, 2014 12:43 am
by Paddyob