ilovefuzz.com

I'm almost finished building my first vero board pedal but am a bit stuck with wiring the enclosure.
Any help would be much appreciated.
I'm a bit confused about this diagrams Stereo Jack lug orientation for Tip/Ring/Ground.

http://www.aronnelson.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=10880&g2_serialNumber=2

As pictured in the Vero diagram:

Stereo Jack has the right side leg as Tip, Ring or Ground?
Stereo Jack middle leg is Tip/Ring or Ground?
Stereo Jack left leg is Tip, Ring or Ground?

Many thanks in advance to anybody who can offer me any help

I think (still working on first cup of coffee . . .) magenta is tip, black is ring, and green is sleeve/ground.

Gone Fission wrote:I think (still working on first cup of coffee . . .) magenta is tip, black is ring, and green is sleeve/ground.

Also on my first cup, haha, but that is correct

Thanks Jero and Gone Fission.
Your help is much appreciated.
My brain was getting sore from trying to figure out the problem myself
Thanks again!!

I always found Beavis' generic stompbox wiring diagram helpful
http://www.beavisaudio.com/techpages/StompboxWiring/

With extreme gain fuzzes, you can mute the circuit's input/output while the effect is bypassed, this avoids self oscillation it could have.