Page 1 of 2
Earthquaker Monarch!
Posted: Fri Feb 22, 2013 8:13 pm
by Mammoth863
Hello. I'm new to this forum and I though I could ask you guys a question about the E.Q. monarch. I absolutely love this pedal but I'd like to give it a little "push" over the edge. Does anyone know of a good pedal to boost it with, I'm currently boosting it with a BBE Boosta Grande and it OK but I'd still like a little more ump. I play stone rock/ rock & roll and I'm using a Carvin VL-100 halfstack on the clean channel (Figured I'd just let ya Know the set up) Thanks!
Re: Earthquaker Monarch!
Posted: Fri Feb 22, 2013 8:20 pm
by Rob Fossil
Since you are a fan of EQD, how about the Speaker Cranker? Also, have you tried running the Monarch at 18 volts instead of 9?
Re: Earthquaker Monarch!
Posted: Fri Feb 22, 2013 8:28 pm
by Mammoth863
Yes the pedal is running 18v. I might just be use to a full distortion but I'd like just a little bit more

Re: Earthquaker Monarch!
Posted: Fri Feb 22, 2013 8:32 pm
by Casavettes
I think either a simple boost like a micro amp
Or another overdrive with a flexible EQ
Re: Earthquaker Monarch!
Posted: Fri Feb 22, 2013 8:34 pm
by Mammoth863
Examples of a overdrive with a flexible EQ?
Re: Earthquaker Monarch!
Posted: Fri Feb 22, 2013 8:38 pm
by WeHuntKings
Mammoth863 wrote:Examples of a overdrive with a flexible EQ?
EQD Talons overdrive has a three band eq and I think a presence knob too.
Re: Earthquaker Monarch!
Posted: Fri Feb 22, 2013 10:29 pm
by Helter
Cleanness

Re: Earthquaker Monarch!
Posted: Fri Feb 22, 2013 10:45 pm
by fungalattack
You may be in dire need of a fuzzbox and use the monarch to shape and add more umph to the fuzz.
Re: Earthquaker Monarch!
Posted: Fri Feb 22, 2013 11:52 pm
by Forrrest
@ 18v you're getting more headroom, which is the opposite of what you want. try running it at 9v instead for more gain.
Re: Earthquaker Monarch!
Posted: Sat Feb 23, 2013 12:15 am
by hbombgraphics
I run my monarch at 9v currently and push it with a black out mantra and a DBA fuzz war
The fuzz gives it a massive amount of grind and the monarch gives the Fuzz war back some definition
with the mantra and monarch you get massive levels of heavy
if you want a straight boost I would go more with a treble style
I use an MI audio boost and buff which gets in to treble booster range at some point
we have a thread for monarch stackers as well
viewtopic.php?f=176&t=26222&hilit=+monarch
Re: Earthquaker Monarch!
Posted: Sat Feb 23, 2013 2:49 am
by goroth
Hbomb speaks the truth. A linear boost may make the monarch fart out. Treble boost will keep it tight. Mid boost can also sound good.
Re: Earthquaker Monarch!
Posted: Sat Feb 23, 2013 4:03 am
by zRobertez
I push my gainy pedals with a maxed out compressor.
i dont care about dynamics or squish when im wanting to go all out
Re: Earthquaker Monarch!
Posted: Sat Feb 23, 2013 9:25 am
by Mammoth863
Awesome guys, thanks for the suggestions! As far as Fuzz I'm not a huge fan, I think the Monarch provides enough for me

I will try running the Monarch at 9v to see if it makes a difference, if not I'll look into some overdrive w/ flexible EQ or a Treble boost. Thanks again!
Re: Earthquaker Monarch!
Posted: Sat Feb 23, 2013 12:08 pm
by MEC
Mammoth863 wrote:...As far as Fuzz I'm not a huge fan...

Re: Earthquaker Monarch!
Posted: Sat Feb 23, 2013 12:21 pm
by Casavettes
MEC wrote:Mammoth863 wrote:...As far as Fuzz I'm not a huge fan...

[youtube]http://www.youtube.com/watch?v=sglyFwTjfDU[/youtube]