Page 1 of 1
anybody else using a iso5
Posted: Sun Oct 28, 2012 9:57 am
by allicio
Just wondering if anybody else is using a voodoo labs ISO 5? And are you powering more than one pedal from any of the outlets?
Re: anybody else using a iso5
Posted: Tue Oct 30, 2012 12:44 pm
by Ryan
I wish I had one of these... and every single power supply available on the market... so I'd know answers for stuff like this. Seems like a good supply and I think lots of people are using these.
Andy had been curious about current requirements and the Iso5 so I'll put these figures here:
Reverberator - 50mA
Elements - 40mA
Frazz - 50mA
Tremolessence - 100mA
Cosmichorus - 115mA
Re: anybody else using a iso5
Posted: Tue Oct 30, 2012 2:30 pm
by allicio
Thankyou so much for taking the time to measure them for me mate it's certainly put my mind at rest.
Basically guys I've been buying a few pedals as I'm re doing my board and it suddenly occurred ti me that I'd run out of outlets on my ISO5 and they may not provide enough power.
So a few panicked emails to Ryan followed!
Y cables were bought and alls well is ends well!!
Re: anybody else using a iso5
Posted: Wed Oct 31, 2012 7:17 pm
by Casavettes
I have a iso5 and have ran a tremolessence, a RRR and an elements off the 12v and 18v outlets with good results
Re: anybody else using a iso5
Posted: Thu Nov 01, 2012 9:46 am
by allicio
Casavettes wrote:I have a iso5 and have ran a tremolessence, a RRR and an elements off the 12v and 18v outlets with good results
Cheers man that was what I was hoping for!!