Page 1 of 1
Ibanez CS5 - how to remove the dry signal? schematic inside
Posted: Thu Sep 01, 2011 7:41 am
by AC128
Hey.
Another 'how do I remove the dry signal' thread.
What do I have to do to turn the CS5 into a Vibrato?
Schematic:
http://www.freeinfosociety.com/electron ... hp?id=2315thanks, appreciate it!
Re: Ibanez CS5 - how to remove the dry signal? schematic ins
Posted: Thu Sep 01, 2011 8:49 am
by McSpunckle
Looks like clipping C30 would do it.
Re: Ibanez CS5 - how to remove the dry signal? schematic ins
Posted: Thu Sep 01, 2011 9:27 am
by AC128
McSpunckle wrote:Looks like clipping C30 would do it.
thanks so much, it worked perfectly!
killing the dry signal turned a useless effect into something pretty cool.
also, I found two trim pots inside that I didn't know of
Re: Ibanez CS5 - how to remove the dry signal? schematic ins
Posted: Thu Sep 01, 2011 12:02 pm
by Jero
One or both of those trimmers might be set for something like optimal noiseless function, so changing may cause unwanted distrortion/buzz. I'm sure you have a meter, just check before twisting.
Re: Ibanez CS5 - how to remove the dry signal? schematic ins
Posted: Thu Sep 01, 2011 2:12 pm
by AC128
Jero wrote:One or both of those trimmers might be set for something like optimal noiseless function, so changing may cause unwanted distrortion/buzz. I'm sure you have a meter, just check before twisting.
thanks,
will do!