Page 1 of 1
would this work?
Posted: Fri Jul 01, 2011 4:27 pm
by Heavy_Soul
expression pedal - AB Box - 2 inputs in Moog phaser
switching the expression to control 2 different parameters?
Re: would this work?
Posted: Fri Jul 01, 2011 4:56 pm
by bigchiefbc
I don't think that will work because exp/cv jacks usually require TRS/stereo signal to work, and most A/B boxes put out mono signals
Re: would this work?
Posted: Fri Jul 01, 2011 5:36 pm
by sonidero
Moog pedals require the CV to be within a certain range and splitting it would not work... You need a CV splitter like the one on the CP-251 which would do like you are saying but x3 and with an expression pedal... Cool
Re: would this work?
Posted: Fri Jul 01, 2011 5:42 pm
by sylnau
Maybe look at Mission... they have one with two out.
Re: would this work?
Posted: Fri Jul 01, 2011 5:49 pm
by Heavy_Soul
the Mission ones look amazing
Re: would this work?
Posted: Fri Jul 01, 2011 5:53 pm
by sylnau
Heavy_Soul wrote:the Mission ones look amazing
From Mission's web site.
The SP-2 features two foot-switchable channels. The SP-2 does not have a switch output like the SP-1, instead it has two pedal outputs. Operating the switch by pushing down on the front of the pedal with your foot, switches the pedal between the two outputs. An LED indicates which channel is selected glowing blue for channel One and red for Channel Two. This feature allows a single expression pedal to be used with 2 devices, great if you have 2 amps, 2 signal chains, or 2 effects that both need an expression pedal. The SP-2 is also available with the R option mini toggle polarity reversal switch.
Re: would this work?
Posted: Fri Jul 01, 2011 6:02 pm
by Heavy_Soul
Yeah sounds perfect but I think 2 moog expression pedals will end up being cheaper than importing the Mission to the UK