Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 11:54 am
Anything out there that is really pretty cutting, yet sludgy? 
Page 1 of 4
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 12:06 pm
Hoof Reaper?
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 12:15 pm
The Manx Loaghtan cuts extremely well and can get pretty sludgy 
For me the bass gets a little boomy as you dial in more rather than thickening up the low end, it's worth a look though
For me the bass gets a little boomy as you dial in more rather than thickening up the low end, it's worth a look though
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 12:30 pm
Hm.. Muff based stuff.
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 12:48 pm
.
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 12:48 pm
Verellen Big Spider in the second mode. It's not ultra-tweakable but sounds great. I prefer it on bass though.
because bass is cooler
because bass is cooler
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 12:58 pm
The TAFM's heavy as a bag of donkey shit. See if Bri can throw a mid control on one and it'd be the biz.
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 1:00 pm
The Musket had a Mids knob, and the focus knob can make it slice through the mix. But it's still a Muff at it's core, so it can do doomy.
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 1:54 pm
Yea, I think I'm not the biggest muff fan. I LOVED the Pharaoh, but at the end of the day it was a little dark for my needs. 
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 1:59 pm
Never had a problem cutting with the Thunder (toneblast on of course)
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 2:05 pm
I vote for the wolf computer
with the gain maxed it's pretty thick and can sustain for a long time if you back the bias off, and the texture of the dronez can be changed by adjusting the sag knob. It can be a bit muffy, but not overly so (I've always kept it on the board with a big muff of some kind and not noticed any overlap). Plus it lives in the mid-range. If you're not getting enough sustain out of it you can run a boost into it and it'll sustain forever.
with the gain maxed it's pretty thick and can sustain for a long time if you back the bias off, and the texture of the dronez can be changed by adjusting the sag knob. It can be a bit muffy, but not overly so (I've always kept it on the board with a big muff of some kind and not noticed any overlap). Plus it lives in the mid-range. If you're not getting enough sustain out of it you can run a boost into it and it'll sustain forever.
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 2:24 pm
The TAFM is pretty spectacular, huge sounding and really tweakable. I don't think it would have any trouble bringing the doomz whilst cutting, I love that pedal!
The LSTR is pretty cool too (just received it so still very new to me), although it will cop the more traditional muff sound which you may not like?? The scoop knob helps to dial it more wide open, Pharaoh(ish) tones to be had without the overall darkness, worth a look maybe. Also packs more gain than the Pharaoh for really bringing the heavies! So far, so good!
The LSTR is pretty cool too (just received it so still very new to me), although it will cop the more traditional muff sound which you may not like?? The scoop knob helps to dial it more wide open, Pharaoh(ish) tones to be had without the overall darkness, worth a look maybe. Also packs more gain than the Pharaoh for really bringing the heavies! So far, so good!
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 3:00 pm
buzzaround.
like a MUFF that CUTS through. but its also tighter, so i dont know that itd be considered sludgy. either way, pretty badass.
like a MUFF that CUTS through. but its also tighter, so i dont know that itd be considered sludgy. either way, pretty badass.
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 3:01 pm
Great midrangey sludge tone with the Megalith on the third position. Anyways, I'd suggest an old '80s Rat.
Re: Midrangey doomy fuzzes?
Posted: Wed Jun 08, 2011 3:07 pm
futuresailors wrote:The TAFM's heavy as a bag of donkey shit. See if Bri can throw a mid control on one and it'd be the biz.
A mids knob would be cool. The switch only seems to do something when using a bass for me. TAFM is heavy fo sho, blend can make it super cutting.