ilovefuzz.com

so i've got a battery clip and a DC power plug that I want to solder together to make my little 45 turntable battery powered.

needs to be center positive.

am i right in thinking that,

I would solder the + (red) wire from the battery clip to the tip connector on the dc power jack?
and the - (black) wire to the sleeve connector?

i know this is moronic , but just want to mkae sure before i fuck up my little turntable


thanks!

Nvrm

Dr. Sherman Sticks M.D. wrote:I would solder the + (red) wire from the battery clip to the tip connector on the dc power jack?
and the - (black) wire to the sleeve connector?

yes this is correct.

multi_s wrote:

Dr. Sherman Sticks M.D. wrote:I would solder the + (red) wire from the battery clip to the tip connector on the dc power jack?
and the - (black) wire to the sleeve connector?

yes this is correct.

thanks mang!

heres to sampling 45s on the road

also apologies for the clutter that seems to be turning into "doc sherms monthly retarded DIY question" thread. i should just condense into one

mods??